Description
PFEA111-20 3BSE028140R0020 Protective devices
PFEA111-20 3BSE028140R0020 Protective devices
Module Clips Drive controller servo moto
PFEA111-20 3BSE028140R0020 Protective devicesSuitable for steel manufacturing, thermal power generation, hydroelectric power generation, nuclear power generation, wind power generation, gas supply, and other glass manufacturing, paper mills, mechanical manufacturing, electronic manufacturing, automotive manufacturing, aviation manufacturing, chemical manufacturing, coal mining and selection, oil and natural gas mining and selection, metal mining and selection, and non-metallic mining and selection
What types of touch screens are there?
Types of touch screens
1. Resistive touch screen
This touch screen uses pressure sensing for control. The main part of the resistive touch screen is a resistive film screen that is
very suitable for the display surface. This is a multi-layer composite film. It uses a layer of glass or hard plastic plate as the base layer
, and the surface is coated with a layer of transparent oxide metal (transparent (conductive resistance) conductive layer, which is covered
with an outer surface hardened, smooth and scratch-resistant plastic layer. Its inner surface is also coated with a coating, and there are
many small (less than 1/1000 inch) between them.
The transparent isolation points separate the two conductive layers and insulate them. When a finger touches the screen, the two conductive
layers come into contact at the touch point, the resistance changes, and signals are generated in the X and Y directions, which are then sent to
the touch screen controller . The controller detects this contact and calculates the (X, Y) position, and then operates according to the simulated
mouse method. This is the most basic principle of resistive technology touch screen. The key to resistive touch screens lies in material technology.
Commonly used transparent conductive coating materials are:
A. ITO, indium oxide, is a weak conductor. Its characteristic is that when the thickness drops below 1800 angstroms (angstroms = 10-10 meters), it
will suddenly become transparent, with a light transmittance of 80%. If it is thinner, the light transmittance will be reversed. decreases,
and then rises to 80% when the thickness reaches 300 angstroms. ITO is the main material used in all resistive technology touch screens and capacitive
technology touch screens. In fact, the working surface of resistive and capacitive technology touch screens is the ITO coating.
B. Nickel-gold coating. The outer conductive layer of the five-wire resistive touch screen uses a nickel-gold coating material with good ductility. Due to frequent touching
, the purpose of using a nickel-gold material with good ductility is to extend the service life of the outer conductive layer. , but the process cost is
relatively high. Although the nickel-gold conductive layer has good ductility, it can only be used as a transparent conductor and is not suitable as a
working surface for a resistive touch screen. Because it has high conductivity and the metal is not easy to achieve a very uniform thickness, it is not suitable for
use as a voltage distribution layer and can only be used as a detector. layer.
1.1 Four-wire resistive screen
The two transparent metal layers of the four-wire resistance analog technology work with a constant voltage of 5V added to each layer: one vertically and one horizontally.
A total of four cables are required . Features: High resolution, high-speed transmission response. Surface hardness treatment to reduce abrasions, scratches and chemical
protection. Available in glossy and matte finishes. Once calibrated, it has high stability and will never drift.
1.2 Five-wire resistive screen
The base layer of the five-wire resistance technology touch screen adds voltage fields in both directions to the conductive working surface
of the glass through a precision resistor network. We can simply understand that the voltage fields in both directions are applied to the same
working surface in a time-sharing manner. The outer nickel-gold conductive layer is only used as a pure conductor. There is a method of detecting
the X-axis and Y-axis voltage values of the inner ITO contact point time-sharing after touching to measure the position of the touch point. The five-wire
resistive touch screen requires four leads in the inner layer of ITO, and only one conductor in the outer layer. The touch screen has a total of 5 leads. Features
High resolution, high-speed transmission response. High surface hardness reduces abrasions, scratches and resists chemical treatments. It can still be used
after 30 million contacts with the same point. Conductive glass is the base material. Once calibrated, it has high stability and will never drift. The five-wire resistive
touch screen has the disadvantages of high price and high environmental requirements.
1.3 Limitations of resistive screens
Whether it is a four-wire resistive touch screen or a five-wire resistive touch screen, they are a working environment that is completely isolated from the outside world.
They are not afraid of dust and water vapor. They can be touched by any object and can be used to write and draw. They are more suitable for the field of industrial
control. and limited-person use within the office. A common disadvantage of resistive touch screens is that because the outer layer of the composite film is made of plastic material,
uninformed people may scratch the entire touch screen if they touch it too hard or use a sharp object, causing it to be scrapped. However, within limits, scratches
will only damage the outer conductive layer. Scratches on the outer conductive layer do not matter for five-wire resistive touch screens, but are fatal for four-wire resistive touch screens.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
RELIANCE 805401-5R Rack assembly
RELIANCE DBU-400 driver
RELIANCE DM-20 Brushless servo driver
RELIANCE DSA-MTR-60D DRIVE CHOP DDS-TLII-MTR-60AMP
ICS Triplex T8202 I/O Power Supply
ICS Triplex T8331 I/O Module
ICS Triplex T8232 Power Pack
ICS TRIPLEX T8431 Trusted TMR 24Vdc Analogue Input Module
ICS Triplex T8233 power port
ICS Triplex T8220 Power Supply Module
ICS Triplex T8902 40 Channel module
ICS Triplex T8153 Communication module
ICS Triplex T8451 Trusted TMR 24 Vdc Digital Output Module
ICS Triplex T8832 60 channel Analogue Input
ICS Triplex T8231 Power Pack 24 Vdc 750 W, universal input, 24 Vdc out.
ICS Triplex T8432 Dual-channel analog input
ICS Triplex T8120 Processor interface adapter
ICS Triplex T8824 Trusted 40 Channel 120Vac Digital Input
ICS Triplex T8901 VFTA Fuse/Link Pack
ICS Triplex T8122 Processor Interface Adaptor
ICS Triplex T8850 Trusted 40 channel Analogue module
ICS Triplex T8802 Trusted 60 Channel 24 Vdc Digital Input FTA
ICS Triplex T8272 Vent & Baffle Unit
ICS Triplex T8192 TMR 24/48 Vdc Digital Output Module
ICS Triplex T8480 Trusted TMR Analogue Output ModuleT8480C
ICS TRIPLEX ROCKWELL T8461 T8461C TMR 24/48 Vdc Digital Output Module
ICS Triplex T8110C Processor
RELIANCE MC-D5006-A IC Memory Card
ICS Triplex T8846 9 Channel Speed Input Fta Plc Module
ICS Triplex T8191 I/O and communication module
ICS Triplex T8270 24Vdc Fan Assembly Rack Mounting
ICS Triplex T8294 Power Distribution Unit
ICS Triplex T8903 60 Channel module
ICS Triplex T8225 Power module conversion
ICS Triplex T9402 Digital Input Module
ICS Triplex T9451 Digital output module
ICS Triplex T3401 24Vdc Digital Input 16 CH
ICS Triplex T9432 Analog Input Module
ICS Triplex T3420A Analog Input Module
ICS Triplex T3511 Rockwell Module
ICS Triplex T3481 High density protection output 24 DVC
ICS Triplex T9110 AADvance Processor Module
ICS Triplex T8312 Trusted TMR Expander Interface Adapter Unit
ICS Triplex T8311 Trusted TMR Expander Interface
ICS Triplex T9100 Processor Module
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
