Description
P0922XW FOXBORO Input/Output Module
P0922XW FOXBORO Input/Output Module
Module Clips Drive controller servo moto
P0922XW PDF
P0922XW HS:8541300000
P0922XW Weight: 2.0kg
P0922XW Size: 40 * 30 * 20cm
.Many products are not yet on the shelves please contact us for more products
.If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture,
and we will arrange to take photos in the warehouse for confirmation
.We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course,
we will respond to your concerns as soon as possible
P0922XW FOXBORO, also known as Foxboro, is a well-known brand in the field of industrial automation, belonging to Invensys Group. It was later acquired by Schneider Electric in January 2014.
As a world leading provider of industrial control products and solutions, FOXBORO”s products are widely used in multiple industries such as oil and gas, petrochemicals, electricity, pulp and paper,
food and beverage, water and wastewater treatment, and serve tens of thousands of factories worldwide.
1、 Products and Services
The products and services provided by P0922XW FOXBORO include but are not limited to:
Planning and Scheduling: Help enterprises optimize production plans and improve production efficiency.
Advanced control and optimization: Through advanced control algorithms, optimize the production process.
Human Machine Interface: Provides an intuitive and user-friendly interface for operators to monitor the production process.
Process control: including DCS (distributed control system), etc., to achieve precise control of the production process.
Process measurement: Provide high-quality sensors and transmitters for measuring process variables such as temperature, pressure, flow rate, and liquid level.
Security Management: Provide comprehensive security solutions to ensure the safety and reliability of the production process.
In addition, FOXBORO also provides services such as condition monitoring, training simulation, alarm management, network security, and enterprise asset management to help
customers balance the availability and utilization of personnel, equipment, energy, and inventory, thereby achieving excellent economic value.
GVC750BE101, PM866, PM861K01, PM864, PM510V16, PPD512 , PPD113, PP836A, PP865A, PP877, PP881, PP885，5SHX1960L0004 3BHL000390P0104 5SGY35L4510 etc.,
P0904HA，E69F-TI2-S，FBM230/P0926GU，FEM100/P0973CA，etc.,
TC-PPD011，CC-PCNT02，etc.,
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
Implementation of communication between ABC industrial robot and PLC based on DeviceNet fieldbus technology
introduction
In modern production systems, industrial robots and PLCs need to communicate and collaborate to complete production tasks. That is, the industrial robots output signals to the PLC, allowing the PLC to control related equipment to drive the robot’s front-end tools. This article mainly analyzes the communication problems between ABB industrial robots and PLC based on DeviceNet fieldbus technology. DeviceNet is a common network communication method in the field of automation. ABB industrial robots establish a network to communicate with Siemens PLC based on the DeviceNet network.
1Configure DSQC652
There are mainly 5 types of standard I/0 boards commonly used in ABB industrial robots [2]. Except for the different addresses assigned to them during setup, their configuration methods are basically the same. This article mainly analyzes the ABB standard I/0 board DS0C652, which mainly builds communication modules based on the DeviceNet network. The DS0C652 board has a distributed I/O module with 16 digital input and 16 digital output interfaces. The board is installed in the ABB industrial robot control cabinet. First, define the specific operation steps of the DS0C652 board, enter the teach pendant control panel, then enter the configuration menu (Figure 1), select the DeviceNetDevice menu, and add a template to enter Figure 2. ABB standard I/0 board is hung on the DeviceNet network, so the address of the module in the network must be set. The jumpers 6 to 12 of terminal x5 are used to determine the address of the module. The available address range is 10 to 63. Modify the parameters in the template parameters to complete the DS0C652 board settings. Click the drop-down menu to select the “Use value from template” row, select “DS0C65224VDCI/0Device”, and then the parameters that need to be set include the address of the I/0 board in the bus.
Figure 1 Configuring DSQC652
2Configure signals and parameters
After completing the DS0C652 board setting, the I/0 signal setting will be performed. Setting the I/0 signal is the basis for establishing communication with the PLC. The PLC communicates and transmits data with the ABB industrial robot through the I/0 signal and the DS0C652 board. As shown in Figure 3, in the signal configuration interface, there are many default I/0 points after the system is established. Modification is not allowed. Click “Add” to add signals. When setting input and output signals, their address range is 0~15. First, enter the signal menu in the configuration options to set the input and output types, and modify the corresponding parameters. After completing the settings, the computer prompts that you need to restart the settings. If there are multiple signals that need to be defined and the waiting time is long after restarting multiple times, you can click “Cancel” and wait for all signals to be defined before clicking the “Yes” button to restart. After the signal settings are completed, click to select “Input and Output” in the ABB menu to check whether all signals have been set.
Figure 2 Configure DSQC652 parameters
Figure 3 Signal parameter settings
During the signal establishment process, attention should be paid to the DSoC652 port and PLC port addresses used, and the corresponding address table should be established, as shown in Table 1. The robot interacts with the PLC through I/O signals. During the setting process, there must be no errors in the port and address number of the PLC connected to the DSoC652. If the address is set incorrectly, the communication between the robot and the PLC will not work properly.
The entire robot teaching pendant setting process is shown in Figure 4.
NMF SRK-04 CONTROL PANEL
NAVIS ENGINEERING MODEL-MCP-PN-DPM011-DPA MAIN CONTROL PANEL
NAVIS AP-3000 CONTROL PANEL
NATIONAL OILWELL EG-III CONTROL MODULE
NACHI FUJIKOSHI CORP EDA-PD1-NWZ-D2-11 HYDRAULIC VALVE
NABTESCO GOVERNOR CONTROL UNIT
NABCO ML-800II TELEGRAPH LOGGER PANEL
NABCO M-800-II-MAIN-ENGINE-REMOTE CONTROL SYSTEM
NABCO M-800-II MAIN ENGINE CONTROL SYSTEM
NABCO K3X012-24C-PCB CONTROL PANEL
MOBREY AB ERAB 620 SAFETY DEVICE AND CONTROLLER
MIYAKI ELECTRIC WDU-1 WATER DETECTOR CONTROL UNIT
MAN B&W OP-E-ELECTRONICS MBD-NO-2053294-1 CONTROL PANEL
AN B&W ALPHATRONIC-2000-PROPULSION CONTROL SYSTEM PANEL
LYNGSO MARINE UCS-2100 LOCAL OPERATOR PANEL
LOUISIANA ELECTRIC RIG SERVICE LERS-160801 REV.2 TYPE-E SCR CONTROL MODULE
LINDENBERG-ANLAGEN AHD-414A CONTROL UNIT
LANNG-STELMAN SEA 1201 MARINE PROCESS CONTROL PANEL
LAMTEC SAACKE FN01-F250 CONTROL MODULE
KWANT CONTROLS SNEEK HOLLAND EOT NORM TYPE-ENGINE-ORDER-TELEGRAPHS PANEL
KWANT CONTROLS 342446-1340 CONTROL LEVER
KVERNER ELEKTRO A.S MOSS GAS DETECTION SYSTEM
KT ELECTRIC TERMINAL BOARD1 NAVIGATION LIGHT CONTROL PANEL
KONGSBERG WCC-600 CALL PANEL ENGINE CONTROL-ALARM SYSTEM
KONGSBERG NORCONTROL WATCH BRIDGE UNIT-WBU CONTROL PANEL
KONGSBERG NORCONTROL SSU-8810 SAFETY SYSTEM UNIT
KONGSBERG NORCONTROL SAX-8810 SIGNAL ACQUISITION UNIT EXT
KONGSBERG NORCONTROL SAU-8810 SIGNAL ACQUISITION UNIT
KONGSBERG NORCONTROL PMU-8810 POWER MANAGEMENT UNIT
KONGSBERG NORCONTROL PCU-8810 PROCESS CONTROL UNIT
KONGSBERG NORCONTROL OPU-8810 ORDER PRINTER UNIT
KONGSBERG NORCONTROL HA451818B THRUSTER CONTROL PANEL
KONGSBERG NORCONTROL HA449019A-OCP-S2 OPERATOR CONTROL UNIT
KONGSBERG NORCONTROL HA444551A-MCI MASTER CLOCK INTERFACE
KONGSBERG NORCONTROL HA339587A-ETU-003 ENGINE TELEGRAPH UNIT
KONGSBERG NORCONTROL HA333688B-WBU WATCH BRIDGE UNIT
ABB Excitation controller VP74201-933CW07
ABB Excitation controller 3BSE027778R1
ABB Excitation controller PFSK165
ABB PFSK165 3BSE027778R1
ABB PFSK165 3BSE027778R1 VP74201-933CW07
KONGSBERG NORCONTROL HA333263B-MPU MULTI PURPOSE UNIT
KONGSBERG NORCONTROL GCU-8810 GENERATOR CONTROL UNIT
KONGSBERG NORCONTROL ETU-002 ENGINE TELEGRAPH UNIT
KONGSBERG NORCONTROL DGU-8800E DIGITAL GOVERNOR UNIT
KONGSBERG NORCONTROL DGU-8800 DIGITAL GOVERNOR UNIT
KONGSBERG NORCONTROL AUTOMATION NA1008-HA-220447B-B OPERATORS PANEL
KONGSBERG NORCONTROL AUTOCHIEF7 REMOTE CONTROL SYSTEM
KONGSBERG NORCONTROL AUTOCHIEF4 REMOTE CONTROL SYSTEM
KONGSBERG NORCONTROL AUTOCHIEF-4 REMOTE CONTROL SYSTEM
KONGSBERG MOS-33 MIDI OPERATOR STATION DISPLAY AND CONTROL PANEL
KARMOY WINCH KARM SYSTEM CONTROL PANEL
and we will arrange to take photos in the warehouse for confirmation
Of course, we will respond to your concerns as soon as possible
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
