Sale!

P0915WG 8-channel isolated output module

¥900.00

Basic parameters

Product Type: Field Control ProcessorP0915WG

Brand: Foxboro (now under Schneider Electric)

Product Code: P0915WG

Memory size: 16 MB SDRAM, 32 MB Flash

Input voltage (redundant voltage): 24V DC (typical value)

Power consumption (per non fault-tolerant module): maximum8.5W

Working temperature: 0 to+60 degrees Celsius (+32 to+140 degrees Fahrenheit)

Size: 14.7 cm x 5.15 cm x 11.4 cm

Weight: 0.6 kilograms (shipping weight 1.5 kilograms)

Category:
  • Email:3221366881@qq.com
  • Phone:+86 17750010683
  • Whatsapp:+8617750010683

Description

P0915WG 8-channel isolated output module
P0915WG 8-channel isolated output module
Module Clips Drive controller servo moto

P0915WG PDF

 

P0915WG HS:8541300000

P0915WG Weight: 2.0kg

P0915WG Size: 40 * 30 * 20cm

P0915WG FOXBORO, also known as Foxboro, is a well-known brand in the field of industrial automation, belonging to Invensys Group. It was later acquired by Schneider Electric in January 2014.
As a world leading provider of industrial control products and solutions, FOXBORO”s products are widely used in multiple industries such as oil and gas, petrochemicals, electricity, pulp and paper,
food and beverage, water and wastewater treatment, and serve tens of thousands of factories worldwide.

1、 Products and Services

The products and services provided by P0915WG FOXBORO include but are not limited to:

Planning and Scheduling: Help enterprises optimize production plans and improve production efficiency.

Advanced control and optimization: Through advanced control algorithms, optimize the production process.

Human Machine Interface: Provides an intuitive and user-friendly interface for operators to monitor the production process.

Process control: including DCS (distributed control system), etc., to achieve precise control of the production process.

Process measurement: Provide high-quality sensors and transmitters for measuring process variables such as temperature, pressure, flow rate, and liquid level.

Security Management: Provide comprehensive security solutions to ensure the safety and reliability of the production process.

In addition, FOXBORO also provides services such as condition monitoring, training simulation, alarm management, network security, and enterprise asset management to help
customers balance the availability and utilization of personnel, equipment, energy, and inventory, thereby achieving excellent economic value.

2、 Technological innovation

P0915WGinstructions       P0915WGTechnical Manual

P0915WG FOXBORO has always been committed to technological innovation and product upgrades. For example, its DCS system continuously introduces advanced technology,
and the I/A series transmitters introduce intelligent automation into the field, providing remote diagnosis and maintenance information. The Foxboro Evo process automation system
collaborates with world leading processing companies to improve efficiency, productivity, and reliability at every operational level it controls.

3、 Market performance

P0915WG FOXBORO enjoys a high reputation in the global industrial automation field with its high-quality products and professional services. Its products have been adopted by tens of
thousands of factories worldwide, including large refineries, gas plants, petrochemical plants, power plants, and more. At the same time, FOXBORO actively explores emerging markets and provides customized solutions for customers in different regions.

4、 Company Culture

P0915WG FOXBORO adheres to the concept of “creating quality with quality and winning the future with integrity”, and is committed to providing customers with high-quality products and services.
The company focuses on technological innovation and talent cultivation, and has a high-quality R&D team and a professional service team. At the same time, FOXBORO actively fulfills its social
responsibility, pays attention to environmental protection and sustainable development.

In summary, P0915WG FOXBORO is a leader in the field of industrial automation, winning the trust and praise of global customers with its high-quality products, professional services, and continuous technological innovation.

Contact: Mr. Lai 
Wechat:17750010683 
Whats app:+86 17750010683 
Skype:+86 17750010683 
QQ: 3221366881 
3221366881@qq.com

Implementation of communication between ABC industrial robot and PLC based on DeviceNet fieldbus technology
introduction

In modern production systems, industrial robots and PLCs need to communicate and collaborate to complete production tasks. That is, the industrial robots output signals to the PLC, allowing the PLC to control related equipment to drive the robot’s front-end tools. This article mainly analyzes the communication problems between ABB industrial robots and PLC based on DeviceNet fieldbus technology. DeviceNet is a common network communication method in the field of automation. ABB industrial robots establish a network to communicate with Siemens PLC based on the DeviceNet network.

1Configure DSQC652

There are mainly 5 types of standard I/0 boards commonly used in ABB industrial robots [2]. Except for the different addresses assigned to them during setup, their configuration methods are basically the same. This article mainly analyzes the ABB standard I/0 board DS0C652, which mainly builds communication modules based on the DeviceNet network. The DS0C652 board has a distributed I/O module with 16 digital input and 16 digital output interfaces. The board is installed in the ABB industrial robot control cabinet. First, define the specific operation steps of the DS0C652 board, enter the teach pendant control panel, then enter the configuration menu (Figure 1), select the DeviceNetDevice menu, and add a template to enter Figure 2. ABB standard I/0 board is hung on the DeviceNet network, so the address of the module in the network must be set. The jumpers 6 to 12 of terminal x5 are used to determine the address of the module. The available address range is 10 to 63. Modify the parameters in the template parameters to complete the DS0C652 board settings. Click the drop-down menu to select the “Use value from template” row, select “DS0C65224VDCI/0Device”, and then the parameters that need to be set include the address of the I/0 board in the bus.

Figure 1 Configuring DSQC652

2Configure signals and parameters

After completing the DS0C652 board setting, the I/0 signal setting will be performed. Setting the I/0 signal is the basis for establishing communication with the PLC. The PLC communicates and transmits data with the ABB industrial robot through the I/0 signal and the DS0C652 board. As shown in Figure 3, in the signal configuration interface, there are many default I/0 points after the system is established. Modification is not allowed. Click “Add” to add signals. When setting input and output signals, their address range is 0~15. First, enter the signal menu in the configuration options to set the input and output types, and modify the corresponding parameters. After completing the settings, the computer prompts that you need to restart the settings. If there are multiple signals that need to be defined and the waiting time is long after restarting multiple times, you can click “Cancel” and wait for all signals to be defined before clicking the “Yes” button to restart. After the signal settings are completed, click to select “Input and Output” in the ABB menu to check whether all signals have been set.

Figure 2 Configure DSQC652 parameters

Figure 3 Signal parameter settings

During the signal establishment process, attention should be paid to the DSoC652 port and PLC port addresses used, and the corresponding address table should be established, as shown in Table 1. The robot interacts with the PLC through I/O signals. During the setting process, there must be no errors in the port and address number of the PLC connected to the DSoC652. If the address is set incorrectly, the communication between the robot and the PLC will not work properly.

The entire robot teaching pendant setting process is shown in Figure 4.

DS3800NHVD1C1B  printed circuit board
DS3800NHVD1D1  printed circuit board
DS3800NHVD1E1B  printed circuit board
DS3800NHVD1E1E  printed circuit board
UFC760BE142 3BHE004573R0142 ABB Controller master unit
UFC760BE42 3BHE004573R0042 ABB System spare parts
UFC760BE43 3BHE004573R0043 System spare parts
DS3800NHVE  printed circuit board
UFC911B106 3BHE037864R0106 System board card
UFC911B108 ABB Control module card key
UFC911B110 ABB Input control panel
UFC921A101 3BHE024855R0101 Interface module
UFD203A101 3BHE019361R0101 ABB Industrial Ethernet
UNITROL 1010 PLC control system
UNITROL 1020 ABB Input output module
UNITROL1000 Z.V3 3BHE014557R0003 ABB Numerical control module
UNS0007A-P V1 ABB DCS controller module
UNS0119A-P,V101 ABB Digital input submodule
UNS0874A ABB  Control I/O module
UNS0887A-P 3BHE008128R0001 Analog input module
UNS2880b-P,V2 3BHE014967R0002 Analog output circuit board
UNS2881B-P V1 ABB Robot network communication card
UNS2882A 3BHE003855R0001 Connecting terminal unit
UNS2980c-ZV4 ABB Robot axis calculation board
UNS4881b,V4 3BHE009949R0004 ABB Analog output circuit board
UNS3670A-Z V2 HIEE205011R0002 Servo servo module
C3K122-24P ENTERASYS Controller module
C3K122-24 ENTERASYS Control of signal
C3G124-48 ENTERASYS  Processor module
C3G124-24 ENTERASYS  Processor module
ENTERASYS C3G124-24P Network interface module
08G20G4-48P  800-Series Layer 2 switch
08G20G4-48  800-Series Layer 2 switch
08G20G4-24P  800-Series Layer 2 switch
08G20G2-08P  800-Series Layer 2 switch
ENTERASYS 08H20G4-48 800-Series Layer 2 switch
08G20G2-08  800-Series Layer 2 switch ENTERASYS
08H20G4-48P 800-Series 10/100 Switches ENTERASYS
08H20G4-24P ENTERASYS switch
08H20G4-24 ENTERASYS 24 port 10/100 800-Series Layer 2 switch
B5K125-48 and B5K125-48P2 ENTERASYS gateway
B5K125-24 and B5K125-24P2 ENTERASYS  Switch
B5G124-24 and B5G124-24P2 Ethernet Switch
ENTERASYS B5G124-24 Ethernet Switch
I3H252-8TX-2FX ENTERASYS High-end Secure Networks
I3H252-8FXM ENTERASYS
I3H252-6TX-MEM ENTERASYS Ethernet
ENTERASYS I3H252-4FX-MEM Ethernet L2 Switch
switch I3H252-4FXM ENTERASYS
I3H252-12TX ENTERASYS Ethernet switch
Switch A2H254-16 ENTERASYS
A2H124-24FX Switch ENTERASYS
ENTERASYS A2H124-48P Switch Ports
A2H124-48 Switch Ports ENTERASYS
A2H124-24P ENTERASYS Switch Ports

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts