Description
P0913ED 8-channel isolated output module
P0913ED 8-channel isolated output module
Module Clips Drive controller servo moto
P0913ED PDF
P0913ED HS:8541300000
P0913ED Weight: 2.0kg
P0913ED Size: 40 * 30 * 20cm
.Many products are not yet on the shelves please contact us for more products
.If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture,
and we will arrange to take photos in the warehouse for confirmation
.We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course,
we will respond to your concerns as soon as possible
P0913ED FOXBORO, also known as Foxboro, is a well-known brand in the field of industrial automation, belonging to Invensys Group. It was later acquired by Schneider Electric in January 2014.
As a world leading provider of industrial control products and solutions, FOXBORO”s products are widely used in multiple industries such as oil and gas, petrochemicals, electricity, pulp and paper,
food and beverage, water and wastewater treatment, and serve tens of thousands of factories worldwide.
1、 Products and Services
The products and services provided by P0913ED FOXBORO include but are not limited to:
Planning and Scheduling: Help enterprises optimize production plans and improve production efficiency.
Advanced control and optimization: Through advanced control algorithms, optimize the production process.
Human Machine Interface: Provides an intuitive and user-friendly interface for operators to monitor the production process.
Process control: including DCS (distributed control system), etc., to achieve precise control of the production process.
Process measurement: Provide high-quality sensors and transmitters for measuring process variables such as temperature, pressure, flow rate, and liquid level.
Security Management: Provide comprehensive security solutions to ensure the safety and reliability of the production process.
In addition, FOXBORO also provides services such as condition monitoring, training simulation, alarm management, network security, and enterprise asset management to help
customers balance the availability and utilization of personnel, equipment, energy, and inventory, thereby achieving excellent economic value.
GVC750BE101, PM866, PM861K01, PM864, PM510V16, PPD512 , PPD113, PP836A, PP865A, PP877, PP881, PP885，5SHX1960L0004 3BHL000390P0104 5SGY35L4510 etc.,
P0904HA，E69F-TI2-S，FBM230/P0926GU，FEM100/P0973CA，etc.,
TC-PPD011，CC-PCNT02，etc.,
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
3.2 Upgrading of regulators and control systems
For the upgrade of the regulator, the original excitation control system cabinet structure is retained, and the entire system is upgraded by upgrading the board card. Among them, the CoB main board, MUB measurement board, F10 input and output board, and LCP local control panel were replaced with the PEC800 controller, CCM measurement control interface board, CIo comprehensive input and output board, and ECT excitation system control terminal in the Unitrol6800 system respectively.
For the upgrade of the power cabinet, since the power of the excitation system will not change during the transformation, the N-1 redundant configuration of the five UNL3300 rectifier bridges in the original system has not been changed, but the control and measurement parts of the rectifier bridge have been upgraded. And the fan circuit and power control part of the rectifier bridge have been upgraded. Among them, the signal interface board (PsI) was changed to the rectifier bridge signal interface board (CsI), the circuit breaker of the rectifier bridge panel was changed from CDP to CCP, and the rectifier bridge control interface board (CIN) was changed to the rectifier bridge control board (CCI).
For the upgrade of the demagnetization cabinet, the switch control part was mainly upgraded. By adding a CIo board to the switch cabinet and installing a special power distributor and relay to control the demagnetization switch, the original PsI board was removed. Secondly, in the transformation of the current detection part, the Hall element in the Unitrol5000 system was replaced by the current relay of the Unitrol6800 system.
For the upgrade of the excitation current measurement part, the rectifier side Hall element of the rectifier bridge was replaced with an AC side CT. Relying on the linearity of the CT, the current sharing coefficient of the excitation system was increased to 0.98, so that the role of the rectifier bridge can be fully exerted in the system. . For the upgrade of the fan power supply circuit of the rectifier cabinet, each power cabinet can independently control the power supply of the fans in the cabinet to avoid the problem that if the power circuit relay fails in the original system, all the fans will not work.
3.3Unitrol6800 functional logic configuration points
The Unitrol6800 system adds PT slow-blow judgment logic, and defines the actions of PT slow-blow as alarm and channel switching. The system PT slow-blow logic pressure difference is 2% to ensure sufficient sensitivity. Since some external reasons will cause the sequential increase or decrease of magnetic commands, a special increase or decrease magnetic contact adhesion judgment logic has been added to effectively lock out external causes. At the same time, it can avoid the jitter of the relay on the increase or decrease magnetic circuit and ensure the stability of the circuit. The excitation temperature detection is used to alarm in the system, but it cannot control the system tripping. The tripping intermediate relays K291 and K292 use high-power (≥5w) relays to avoid the problem of tripping of the excitation system due to signal interference.
4 Problems discovered during the transformation and their solutions
After upgrading the excitation system from Unitrol5000 to Unitrol6800, since the partition between the regulator cabinets of the original excitation switch cabinet was removed and the mounting backplate of the regulator was moved forward, the hot air from the excitation switch cabinet will enter the excitation regulator cabinet, causing the cabinet to be damaged. The internal temperature rises, and sometimes the temperature can even reach 45°C. In order to avoid problems caused by high temperatures, partitions were added to reduce the temperature inside the switch cabinet and control the temperature to 30°C.
During the maintenance process, if the grounding carbon brush of the generator is removed, it is easy to cause the rotor grounding relay isoLR275 to malfunction. Therefore, during maintenance, the power supply of the grounding relay will be disconnected and the large shaft in the magnetic cabinet will be short-circuited.
5 Conclusion
Through the transformation of the excitation system, our company not only meets the needs of increasing the generator capacity, but also eliminates the safety hazards of ARCnet failure or flat cable damage in the excitation system of the unit. It can find the fault point during maintenance and prevent the unit from non-stop. event. The new board used in the new excitation system has modular characteristics, which can make online maintenance more convenient, and because the boards use trigger pulse generation communication and optical fiber redundant communication, the stability of information transmission is ensured. Avoid communication failures and damage to pulse lines.
940860010102-VBM030 Ultrasonic diagnostic instrument
51403645-100-SBHM Power control board module
51402455-100-MP-DNCF02-200 Honeywell
51402455-100 MP-DNCF02-200 Power module
51304650-100 HONEYWELL Industrial pressure sensor
51303940-150 Honeywell Cabinet fan assembly with alarm
8141649.53 Main board SEW
8100183 Dual process segment controller KONGSBERG
4000093-110N Bolt type terminal connection
3171197-4 B&w Man-machine interface panel
10313/1/1 Honeywell Terminal module
1030211 Relay module PLC-RPT- 24DC/21
822675X.13.17 servo motor
805405-1R Power module unit
395566-003 HP Server motherboard
3500/44M 176449-03 Speed sensor Bently
3500/42M-01-00 Speed monitor Bently Nevada
3500/33 Bently Nevada 149986-01 preamplifier
3500/33 Bently Nevada preamplifier
3500/25 Bently Nevada Accelerometer sensor
3500/25 149369-01 Speed sensor Bently
350022M-288055-01 Transient data interface Bently
3500/15 Power module Bently Nevada
3500/05-02-04-00 bently Monitoring vibration
330180-51-00 bently preprocessor
330180-50-00 5/8 mm proximity sensor
330105-02-12-05-02-05 Bentley Reverse mounting probe
Bently 330100-90-01 Vibration sensor
330016-11-01-03-00-00-01 BENTLY NEVADA
2300/25-00 BENTLY monitor module
192061B-02 NI acquisition card data connection cable
190065A-01-01-01-00-00 Universal equipment monitor
146031-01 Transient data interface I/O module
140734-01 4-channel monitor Bently
133442-01 Output module Bently
129478-01 High DC power input
128275-01-E Seismic monitor module
125720-01 Bently Nevada channel relay module
086349-002 Measuring Pcb Circuit board
ABB 086329-004 PWA，ECS，END COL
81943A041 Amplifier TC assy
80190-380-01-R Rectifier/charger
80026-044-06-R Power switching module
65040-PACV-AYU2 Control swing valve
41391-454-01-S1FX Control module Allen-Bradley
24765-02-00 Casing expansion sensor system
10350-00104 Ethernet connection Connect.
10244-27-50-01 Liquid level sensor
9907-1183 Control of various turbines
and we will arrange to take photos in the warehouse for confirmation
Of course, we will respond to your concerns as soon as possible
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
