Sale!

P0800GM On site equipment system integrator

¥900.00

Basic parameters

Product Type: Field Control ProcessorP0800GM

Brand: Foxboro (now under Schneider Electric)

Product Code: P0800GM

Memory size: 16 MB SDRAM, 32 MB Flash

Input voltage (redundant voltage): 24V DC (typical value)

Power consumption (per non fault-tolerant module): maximum8.5W

Working temperature: 0 to+60 degrees Celsius (+32 to+140 degrees Fahrenheit)

Size: 14.7 cm x 5.15 cm x 11.4 cm

Weight: 0.6 kilograms (shipping weight 1.5 kilograms)

Category:
  • Email:3221366881@qq.com
  • Phone:+86 17750010683
  • Whatsapp:+8617750010683

Description

P0800GM On site equipment system integrator
P0800GM On site equipment system integrator
Module Clips Drive controller servo moto

P0800GM PDF

P0800GM HS:8541300000

P0800GM Weight: 2.0kg

P0800GM Size: 40 * 30 * 20cm

P0800GM FOXBORO, also known as Foxboro, is a well-known brand in the field of industrial automation, belonging to Invensys Group. It was later acquired by Schneider Electric in January 2014.
As a world leading provider of industrial control products and solutions, FOXBORO”s products are widely used in multiple industries such as oil and gas, petrochemicals, electricity, pulp and paper,
food and beverage, water and wastewater treatment, and serve tens of thousands of factories worldwide.

1、 Products and Services

The products and services provided by P0800GM FOXBORO include but are not limited to:

Planning and Scheduling: Help enterprises optimize production plans and improve production efficiency.

Advanced control and optimization: Through advanced control algorithms, optimize the production process.

Human Machine Interface: Provides an intuitive and user-friendly interface for operators to monitor the production process.

Process control: including DCS (distributed control system), etc., to achieve precise control of the production process.

Process measurement: Provide high-quality sensors and transmitters for measuring process variables such as temperature, pressure, flow rate, and liquid level.

Security Management: Provide comprehensive security solutions to ensure the safety and reliability of the production process.

In addition, FOXBORO also provides services such as condition monitoring, training simulation, alarm management, network security, and enterprise asset management to help
customers balance the availability and utilization of personnel, equipment, energy, and inventory, thereby achieving excellent economic value.

2、 Technological innovation

P0800GMinstructions       P0800GMTechnical Manual

P0800GM FOXBORO has always been committed to technological innovation and product upgrades. For example, its DCS system continuously introduces advanced technology,
and the I/A series transmitters introduce intelligent automation into the field, providing remote diagnosis and maintenance information. The Foxboro Evo process automation system
collaborates with world leading processing companies to improve efficiency, productivity, and reliability at every operational level it controls.

3、 Market performance

P0800GM FOXBORO enjoys a high reputation in the global industrial automation field with its high-quality products and professional services. Its products have been adopted by tens of
thousands of factories worldwide, including large refineries, gas plants, petrochemical plants, power plants, and more. At the same time, FOXBORO actively explores emerging markets and provides customized solutions for customers in different regions.

4、 Company Culture

P0800GM FOXBORO adheres to the concept of “creating quality with quality and winning the future with integrity”, and is committed to providing customers with high-quality products and services.
The company focuses on technological innovation and talent cultivation, and has a high-quality R&D team and a professional service team. At the same time, FOXBORO actively fulfills its social
responsibility, pays attention to environmental protection and sustainable development.

In summary, P0800GM FOXBORO is a leader in the field of industrial automation, winning the trust and praise of global customers with its high-quality products, professional services, and continuous technological innovation.

Contact: Mr. Lai 
Wechat:17750010683 
Whats app:+86 17750010683 
Skype:+86 17750010683 
QQ: 3221366881 
3221366881@qq.com

The growth rate of the industry’s overall net profit attributable to parent companies continues to decline, and the phenomenon of increasing industry revenue without increasing profits is obvious. In 2018, the industry as a whole achieved a net profit attributable to the parent company of 3.250 billion yuan, with a year-on-year growth rate of -26.42%. Although the overall revenue growth rate was positive in 2018, in the context of the fierce price war in the industry, increasing revenue does not increase profits. The phenomenon is very significant. In 2019Q1-3, the industry as a whole achieved net profit attributable to the parent company of 1.888 billion yuan, a year-on-year growth rate of -43.63%, and the growth rate of net profit attributable to the parent company continued to decline. Judging from the net profit attributable to the parent company of the industry in a single quarter, dragged down by the poor performance of New Star, the net profit attributable to the parent company of the industry in the single quarter of 2018 Q4 suffered a loss of 98 million yuan. The net profit performance of the industry attributable to the parent company has continued to be sluggish since 2019. . It is expected that the decline in the industry’s net profit attributable to the parent company for the whole year will narrow compared with the first three quarters, and the overall profitability will hit a historical bottom.

The industry’s overall gross profit margin and net profit margin have continued to decline since 2017, and changes in gross profit margin and net profit margin in a single quarter are negatively correlated or related to the pace of corporate expense control. In 2019Q1-3, the overall gross profit margin of the industry was 28.68%, and the net profit margin was 5.54%. It has continued to decline since reaching a historical high in 2017, and the decline curve has gradually flattened. It is expected that the overall gross profit margin decline is expected to stabilize in 2020, and the net profit margin may be Ushering in upward repair. Judging from the changes in the industry’s overall gross profit margin and net profit margin in a single quarter, the two show a certain negative correlation. This may be due to the company’s reduction in gross profit margin due to fierce price wars or falling sales volume caused by the industry downturn. It is related to its own period expenses. On the contrary, when the gross profit margin rebounds, the company’s period expenses will increase to a certain extent.

The industry’s overall operating cash flow has significant seasonal characteristics, and most sales collections are concentrated in Q4, which leads to an improvement in overall cash flow. In 2019Q1-3, the industry’s overall operating net cash flow was 580 million yuan, accounting for 1.52% of operating income. There is a big gap between this value and the whole year in previous years. Through the analysis of single-quarter data, it is found that the industry generally has negative operating net cash flow in the first quarter, and there will be a substantial inflow of operating net cash flow in the fourth quarter, thus driving the overall industry. Cash flow improved. China Merchants Bank Research Institute believes that this is mainly related to the industry’s payment methods. Most companies in the industry will advance capital investment after receiving orders at the beginning of the year, resulting in greater cash flow outflow. As the project settlement is gradually accepted and completed at the end of the year, payment collections are concentrated in the year. Tail release.

5. A drop in short-term prosperity will not change the long-term growth trend

In 2018, global industrial robot sales reached 422,000 units, a year-on-year increase of 11.05%. IFR predicts that the sales growth rate in 2019 will reach -0.24%. In 2018, the total sales of industrial robots in my country was approximately 154,000 units, accounting for 36.49% of global sales. It is still the largest industrial robot market in the world.

In 2018, the sales of industrial robots in my country reached US$5.4 billion, an increase of 21% over 2017. The decrease in sales volume but the increase in sales indicate that the average value of each industrial robot used in my country is increasing, and the products are gradually moving from low-end to mid-to-high-end. . From the perspective of industrial robot density, Singapore reached 831 units/ten thousand people in 2018, the highest in the world, followed by South Korea (774 units) and Germany (338 units). my country’s industrial robot density was 140 units/ten thousand people, higher than the world’s Average for each region (99 units).

Compared with Singapore, South Korea, Germany and other developed countries in manufacturing automation, my country’s industrial robot sales still have a lot of room for improvement, and the long-term growth trend of the industry is clear. Through the overall third quarter report data of listed companies, we found that the overall industry revenue in 2019Q1-3 declined slightly year-on-year, and the negative growth in single-quarter revenue narrowed significantly; the growth rate of the industry’s net profit attributable to parent companies continued to decline, and the industry’s increase in revenue did not increase profits. The industry as a whole Operating cash flow has significant seasonal characteristics, and most sales collections are concentrated in Q4, which leads to an improvement in overall cash flow. Based on the previous macro data, it is believed that the fundamentals of the industry have hit the bottom, and the industry has structural differentiation characteristics. Looking forward to 2020, the negative impact of declining automobile sales on the demand for industrial robots will gradually weaken. The 3C field may contribute to the main increase in demand for industrial robots, and an industry turning point may be coming.

P0916NG FOXBORO Field Terminal Assembly
P0916AG FOXBORO FBM204 Field Terminal Assembly
P0904HA FOXBORO Industrial power module P0904HA
MRU-M-MB3 KONGSBERG Motion reference device
MMS6120 Dual channel bearing vibration monitor EPRO MMS 6120
RET670 Transformer protection ABB 1MRK002816-AG
5AP933.215C-00 Touch screen B&R 5AP933.215C-00
PXIE-6738 PXI analog output module NI PXIE-6738
AEM402 Analog input module Lyngso marine AEM 402
9760-230 current input module Triconex 9760-230
9662-610 module Triconex 9662-610
5304-MBP-PDPM Master Gateway prosoft 5304-MBP-PDPMV1
4351B communication module Triconex 4351
MMII-C-0-0-120 GE Motor protection system
3805E I/O module Triconex 3805H
3704E Input module Triconex 3704E
3625 Output module Triconex 3625A 3625C1
3511 Pulse Input Module Triconex 3515
3504E Digital input module Triconex 3503E
3009 Main processor Triconex 3009
3008 Main Processor Triconex 3008
VE4001S5T2B4 16 Channels Input Card DeltaV
VE4001S3T2B2 8 Channels Input Card DeltaV
VE4001S3T2B1 8 Channels Input Card DeltaV
VE4001S3T1B2 8 Channels Input Card DeltaV
VE4001S3T1B1 8 Channels Input Card DeltaV
VE4001S2T2B5 32 Channels Input Card DeltaV
VE4001S2T2B4 Discrete Input Card DeltaV
VE4001S2T2B3 Discrete Input Card DeltaV
VE4001S2T2B2 Fused I/O Termination Block DeltaV
VE4001S2T2B1 Standard I/O Termination Block  DeltaV
VE4001S2T2 Discrete Input Card DeltaV
VE4001S2T1B3  Discrete Input Card DeltaV
VE4001S2T1B2 Discrete Input Card DeltaV
VE4001S2T1B1 Discrete Input module  DeltaV
VE3051C0 Power controller carrier  DeltaV
VE3008 MQ Controller DeltaV
VE3006 MD-PLUS controller DeltaV
VE3007 MX Controller  DeltaV
VE3005 Controller MD DeltaV
VE3004 MD Controller  DeltaV
VE3002 Controller Module DeltaV
SE4005S2B2 8 channels AO Card DeltaV
SE4005S2B1 8 channels AO Card DeltaV
SE4003S2B1 8 channels AI Card DeltaV
SE4002S1T2B1 8 channels DO Card  DeltaV
SE4002S1T1B2 8 channels Discrete Output Card DeltaV
SE4002S1T1B1 8 channels DO Card  DeltaV
SE4001S2T2B1 Traditional I/O DeltaV
SE3008 SQ controller  DeltaV
SE3007 SX controller  DeltaV
SE3006 controller DeltaV
KJ3002X1-BB1 AO, 8-Channel, 4-20 mA Card DeltaV
KJ3002X1-BA1 8-Channel HART Card  DeltaV
KJ3001X1-BK1 Input module DeltaV

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts