Description
LTC743CE 3BHE013299R0001 Protective devices
LTC743CE 3BHE013299R0001 Protective devices
Module Clips Drive controller servo moto
LTC743CE 3BHE013299R0001 Protective devicesSuitable for steel manufacturing, thermal power generation, hydroelectric power generation, nuclear power generation, wind power generation, gas supply, and other glass manufacturing, paper mills, mechanical manufacturing, electronic manufacturing, automotive manufacturing, aviation manufacturing, chemical manufacturing, coal mining and selection, oil and natural gas mining and selection, metal mining and selection, and non-metallic mining and selection
1.2 Five-wire resistive screen
The base layer of the five-wire resistance technology touch screen adds voltage fields in both directions to the conductive working surface of the glass
through a precision resistor network. We can simply understand that the voltage fields in both directions are applied to the same working surface in
a time-sharing manner. The outer nickel-gold conductive layer is only used as a pure conductor. There is a method of detecting the X-axis and Y-axis
voltage values of the inner ITO contact point time-sharing after touching to measure the position of the touch point. The five-wire resistive touch screen
requires four leads in the inner layer of ITO, and only one conductor in the outer layer. The touch screen has a total of 5 leads. Features: High resolution
, high-speed transmission response. High surface hardness reduces abrasions, scratches and resists chemical treatments. It can still be used after 30
million contacts with the same point. Conductive glass is the base material. Once calibrated, it has high stability and will never drift. The five-wire
resistive touch screen has the disadvantages of high price and high environmental requirements.
1. 3 Limitations of resistive screens
Whether it is a four-wire resistive touch screen or a five-wire resistive touch screen, they are a working environment that is completely isolated from the
outside world. They are not afraid of dust and water vapor. They can be touched by any object and can be used to write and draw. They are more suitable
for the field of industrial control. and limited-person use within the office. A common disadvantage of resistive
touch screens is that because the outer layer of the composite film is made of plastic
material, uninformed people may scratch the entire touch screen if they touch it too hard or use a sharp object,
causing it to be scrapped. However, within
limits, scratches will only damage the outer conductive layer. Scratches on the outer conductive layer do not
matter for five-wire resistive touch screens, but are fatal for four-wire resistive touch screens.
2. Capacitive touch screen
2.1 Capacitive technology touch screen
It works by using the human body”s current induction. The capacitive touch screen is a four-layer composite glass screen. The inner surface and
interlayer of the glass screen are each coated with a layer of ITO. The outermost layer is
a thin layer of silica glass protective layer. The interlayer ITO coating serves as the working surface. Four electrodes are drawn out, and the inne
r ITO layer is a shielding layer to ensure a good working environment. When a finger touches the metal layer, due to the electric field of the human
body, a coupling capacitance is formed between the user and the touch screen surface. For high-frequency current, the capacitance is a direct conductor,
he four corners. The controller obtains the position of the touch point by accurately calculating the ratio of these four currents. .
2.2 Defects of capacitive touch screens
The light transmittance and clarity of the capacitive touch screen are better than the four-wire resistive screen, but of course it cannot be compared with
the surface acoustic wave screen and the five-wire resistive screen. The capacitive screen is seriously reflective, and the four-layer composite touch screen
with capacitive technology has uneven transmittance of light of various wavelengths, causing color distortion. Due to the
reflection of light between the layers, the image characters are also blurred. In principle, the capacitive screen uses the human body as an electrode of
a capacitor element. When a conductor is close to the interlayer ITO working surface and a sufficient capacitance is coupled, the current flowing away is
enough to cause the capacitive screen to malfunction. . We know that although the capacitance value is inversely proportional to the distance between the
poles, it is directly proportional to the relative area, and is also related to the insulation coefficient of the medium. Therefore, when a larger area of the palm or a
conductive object is held close to the capacitive screen instead of touching it, it can cause the capacitive screen to malfunction. In humid weather
, this situation is particularly serious. Putting your body within 15 cm of the monitor can cause the capacitive screen to malfunction. Another disadvantage of capacitive
screens is that they do not respond when touched with a gloved hand or a non-conductive object, due to the addition of a more insulating medium. The main disadvantage of the
capacitive screen is drift: when the ambient temperature and humidity change
, and the environmental electric field changes, it will cause the capacitive screen to drift, causing inaccuracy. For example: the temperature rise of the monitor after turning on the
screen will cause drift: when the user touches the screen while the other hand or side of the body is close to the monitor, it will drift; larger objects near the capacitive touch screen
will drift after being moved, and if someone comes around to watch when you touch the screen, it will drift. Will cause drift; The reason for the drift of the capacitive screen is due to
inherent technical shortcomings. Although the environmental potential surface (including the user”s body) is far away from the capacitive touch screen, it is much larger than the finger
area. They directly affect the determination of the touch position. In addition, many relationships that should be linear in theory are actually non-linear. For example, people with different
weights or fingers with different degrees of wetness draw different total currents, and the changes in the total current and the changes in the four partial currents It is a non-linear relationship.
The four-corner custom polar coordinate system used by the capacitive touch screen does not have an origin on the coordinates. The controller cannot detect and recover after drifting. Moreover,
after the four A/Ds are completed, the four points are The calculation process from the flow value to the X and Y coordinate values of the touch point on the rectangular coordinate system is
complicated. Since there is no origin, the drift of the capacitive screen is cumulative and calibration is often required at the job site. The outermost silica protective glass of the capacitive touch
screen is very scratch-resistant, but it is afraid of being hit by nails or hard objects. Knocking out a small hole will damage the interlayer ITO, whether it is damage to the interlayer ITO or damage
during installation and transportation. With the ITO layer on the inner surface, the capacitive screen cannot work properly. [!–empirenews.page–]
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
1SAP130100R0270 Logic Controller
XVS-440-57MPI-1-1A0 EATON ELECTRIC Touch
TC625 3BSE002224R1 ABB single chip temperature sensor
IS200VCMIH2BCC GE Mark VI printed circuit board.
HE693ADC405 Analog input channel
IC694APU300 high speed counter module GE
57120001-PC analog input/output board DSAX 110A
XVME-956/12 I/O expansion bracket
TC-ODK161 Digital output PLC card
TC-PRS021 Control processor module TC-CCR014
DS200LDCCH1ANA LAN communication board DS200LDCCH1AGA
3500/05-05-00 Ac and DC power supplies 3500/05
3300/36-14-12-02-02-00 RPM module
IMCIS02 Controls the I/O slave module
51304419-150 MC-IOLX02 Standard I/O link expansion card
2711P-T10C22D8S Man-machine interface (HMI) components
750-P5-G5-D5-HI-A20-R distribution feeder management relay
5202-MNET-MCM4 ProLinx EtherNet/IP to Modbus Primary/secondary gateway
IS215UCVGH1A UCV controller
1756-IF4FXOF2F Analog Combined I/O module
IC693ALG392C Indicates the analog output module
MVME162-020A Embedded controller
PCI-4472B Sound and vibration equipment
IC200UEX636 Analog extension unit
1797-IE8 Flex Ex Analog input module
9907-186 Synchronizer module
IC800SSI216RD2 servo motor controller
IC695ALG112 Indicates the analog input module
SCP451-51 S1 processor module
DSTC406 57520001-DX terminal unit
3500/92-01-01-00 Communication gateway 3500/92
SB401-50 Slave module of the ESB bus interface
DSTC176 57310001-KT bus extension terminal device
SST-IBS-CLX interbus scanner
MBDHT2510E02 Panasonic servo drive unit
IC697RCM711RR Redundant communication module
DKCXX.3-040-7 Servo drive controller
IC693CHS391E/G Modular CPU base
IC693CHS397E CPU base of slot 5
IC690USB901 converter cable
IC200ALG322 Versamax analog output module
CC-TAIN01 Non Redundant IOTA Models
CC-TAOX01 IOTA Models Non-Redundant
CC-PDIL51 digital output module
CC-TDOD51 Input/Output terminal components
CC-TDIL51 digital input module
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
