Description
INICT13 Controller module
INICT13 Controller module
Module Clips Drive controller servo moto
INICT13 Controller moduleSuitable for steel manufacturing, thermal power generation, hydroelectric power generation, nuclear power generation, wind power generation, gas supply, and other glass manufacturing, paper mills, mechanical manufacturing, electronic manufacturing, automotive manufacturing, aviation manufacturing, chemical manufacturing, coal mining and selection, oil and natural gas mining and selection, metal mining and selection, and non-metallic mining and selection
1) Check whether the touch screen connections are connected correctly, and whether one
of the connections connected to the keyboard port of the host computer (take the 5 volt touch screen
operating voltage from the keyboard port) is connected. Please check the connections.
2) Observe the light of the touch screen control box. If it does not light up or lights up red, it
means the control box is broken and please replace it.
3) If it is confirmed that the above situation is not the case, please delete the touch screen
driver and restart the computer to reinstall the driver, or replace it with a newer and higher version driver.
4) Check whether there is a conflict between the device in the host and the serial port resources.
Check each hardware device and adjust it. For example, the default IRQ of some network cards after installation is
3, which conflicts with the IRQ of COM2. At this time, the IRQ of the network card should be changed to an idle and
unused IRQ. It may be that the computer motherboard
and the touch screen control box are not compatible. Please replace the host or motherboard. .
5) If you find that some areas of the touch screen cannot be touched after using it for a long period of time
(3-4 years), the touch screen may be broken. Please replace the touch screen.
If it is a capacitive touch screen, you can perform the following maintenance:
3. Touch screen response time is very long
[Troubleshooting]
A touch screen takes a long time to respond after touching the monitor screen with your fingers.
[Fault analysis and processing]
This may be caused by moving water droplets stuck to the touch screen, just wipe it with a dry soft cloth. It
is also possible that the host is too low-grade, such as the clock frequency is too low. If this is the case, it is best to replace the host.
4. The touch screen is partially unresponsive
[Troubleshooting]
A touch screen, after touching the monitor screen with a finger, there is no response in some places.
[Fault analysis and processing]
It is possible that the reflective stripes on the touch screen are partially covered. You can wipe them clean
with a dry soft cloth. It is also possible that the reflective stripes on the touch screen were partially scratched off by a hard object and cannot be repaired.
5. The touch screen works normally but the computer cannot be operated.
[Troubleshooting]
A touch screen itself is tested and everything is normal, but after being connected to the host computer, the computer cannot operate.
[Fault analysis and processing]
This may be because the touch screen control card receives the operation signal before the host starts loading the
touch screen driver. You only need to cut off the power again and then restart the computer. It is also possible that the
touch screen driver version is too low and the latest driver needs to be installed.
6. The touch screen does not respond when started for the first time after installing the driver.
[Troubleshooting]
I have a touch screen. After installing the driver, the touch screen becomes unresponsive when I start it for the first time.
[Fault analysis and processing]
First, confirm whether the touch screen circuit connections are correct. If not, shut down the machine and connect all the
circuits correctly. Then check whether there is a device conflict with the serial port resource in the host, check each hardware
device and adjust them. For example, the default IRQ of some network cards after installation is 3, which conflicts with the IRQ
of COM2. At this time, the IRQ of the network card should be changed to idle and unused. IRQ.
Contact: Mr. Lai
Wechat:17750010683
Whats app:+86 17750010683
Skype:+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
PPE091A101 3BHE044481R0101 ABB
PPE091A101 3BHE044481R0101 3BHE044477P3REVA
HIEE400235R1 Control board ABB
HIEE300016R2 Control board ABB
PPA322B Control board ABB
PPA322B HIEE400235R1 ABB
PPA322B HIEE300016R2 ABB
PPA322B HIEE300016R2 HIEE400235R1
3HNA023093-001 Robot spare parts
3HNA000512-001 Robot spare parts
3HNA024871-001 Robot spare parts
ACU-01B Spare parts for spraying robot
ACU-01B 3HNA024871-001 ABB
3BSE018134R1 controller ABB
CI855-1 controller ABB
3BSE018144R1 controller ABB
CI857K01 controller ABB
3BSE018137R1 Main control board
CI858-1 Main control boardABB
3BSE018135R1 controller ABB
CI858K01 controller ABB
3BSE048845R2 controller ABB
CI868K01-eA controller ABB
ABB 3BSE050198R1 controller
ABB PM866K01 controller
3BSE022366R1 controller ABB
CI801 controller ABB
3BSE022162R1 Main control board
CI535V30 Main control board
3BSE012545R1 Main control board ABB
CI546 Main control board ABB
ABB 3BSE014666R1 Main control board
ABB CI541V1 Main control board
3BSE010700R1 Main control board
CI534V02 Main control board
3BHE039203R0101 I/O module ABB
CI532V05 I/O module ABB
3BSE018283R1 I/O module ABB
CI522A I/O module ABB
ABB 3BSE012869R1 Main control board
ABB CI520V1 Main control board
3BSE030220R1 controller ABB
CI854AK01 controller ABB
ABB controller 3BHE042816R0101
3BHE032025R1101 controller ABB
PCD235B1101 controller ABB
3BHE022293R010 controller ABB
PCD232A controller ABB
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts