Description
DI830 3BSE013210R1 Power Supply Module
DI830 3BSE013210R1 Power Supply Module
Module Clips Drive controller servo moto
DI830 3BSE013210R1 Power Supply ModuleSuitable for steel manufacturing, thermal power generation, hydroelectric power generation, nuclear power generation, wind power generation, gas supply, and other glass manufacturing, paper mills, mechanical manufacturing, electronic manufacturing, automotive manufacturing, aviation manufacturing, chemical manufacturing, coal mining and selection, oil and natural gas mining and selection, metal mining and selection, and non-metallic mining and selection
infrared camera
The four-wire touch screen does not consider the parasitic resistance of the electrode tap leads and the
circuit that drives the electrode. This resistance is not included in the ITO resistance, and the resistance fluctuates
due to the influence of ambient temperature, which is likely to affect the accuracy of the calculation. Therefore, eight Wire resistive touch screen concept.
The advantage of the four-wire/eight-wire resistive touch screen is that it can not only calculate the horizontal X and Y
coordinates, but also measure
the longitudinal Z coordinate, that is, the pressure of the finger, through a series of methods. This is obtained by
measuring the longitudinal contact resistance Rtouch. Because when contact occurs, the contact resistance is
inversely proportional to the pressure. The greater the pressure, the smaller the contact resistance. The measured value
of this resistance can be used to quantify the contact pressure.
The disadvantage of the four-wire/eight-wire resistive touch screen is that it is not durable enough. Long-term touch and
pressure will cause damage to the device. Because the upper PET and ITO will deform every time it is
touched, and the ITO material is brittle and easily damaged when deformation occurs frequently. Once the ITO layer breaks,
the uniformity of conduction is destroyed, and the proportional equivalence when deriving the coordinates above no longer exists.
This kind of breakage is very likely to occur when frequent
The area that was touched, such as the location of the “Confirm” key. Another disadvantage is that the ITO attached to the PET
movable substrate will not be fully oxidized. Once exposed to moisture or heat, oxidation will cause the resistance to rise, which
will also destroy the conductive uniformity and cause errors in coordinate calculations, that is, “drift” Phenomenon. This gave rise
to the concept of five-wire resistive screens. Short Message Service Center
3. Five-wire resistive touch screen
In view of the shortcomings of the four-wire resistive touch screen, the structure of the five-wire resistive touch screen is that the X
and Y electrodes are made on the ITO layer attached to the glass substrate, and the upper ITO only serves as the active electrode.
The X and Y electrodes of the bottom ITO lead out UL, UR, LL, and LR from the four corners, plus the upper movable electrode, so there are five lines in total.
The advantage is that the glass substrate is relatively strong and not easily deformed, and can fully oxidize the ITO attached to it.
The glass material does not absorb water, and its expansion coefficient is very close to that of ITO, so the resulting deformation will
not cause damage to ITO. The upper ITO is only used as the lead-out electrode, and no current flows, so uniform conductivity is not
required. Even if it is damaged due to deformation, the resistive screen will not “drift”.
The electrodes of the five-wire resistive touch screen cannot be led from the four sides by conductive strips like the four-wire resistive
screen, which will cause a short circuit. The electrodes are dispersed into many resistive patterns distributed around the touch screen
and then drawn out from the four corners. The function of these patterns is to make the voltage gradient in the X
and Y directions of the touch screen linear, which facilitates the measurement of coordinates.
Camel outdoor hiking bag
4. Six-wire resistive touch screen
Toshiba”s withdrawal from the notebook business is based on the five-wire resistive touch screen. The six-wire resistive touch screen adds
a grounded conductive layer on the back of the glass substrate to isolate signal crosstalk from the back of the glass substrate.
win7 graphics card driver>Liu Chuanzhi’s daughter
5. Seven-wire resistive touch screen
Like the four-wire resistive touch screen, the five-wire resistive touch screen does not consider the parasitic resistance of the electrode tap lead
and the circuit that drives the electrode. This part of the resistance is not included in the ITO resistance and is likely to affect the accuracy of the
calculation. Therefore, seven The wire resistive touch screen is based on the five-wire resistive touch screen. A wire is drawn from both ends of
UL and LR to sense the actual touch screen terminal voltage, which are recorded as Vmax and Vmin respectively. The working principle is the same as the five-wire resistive touch screen.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
UFC911B106 3BHE037864R0106 System board card
UFC911B108 ABB Control module card key
UFC911B110 ABB Input control panel
UFC921A101 3BHE024855R0101 Interface module
UFD203A101 3BHE019361R0101 ABB Industrial Ethernet
UNITROL 1010 PLC control system
UNITROL 1020 ABB Input output module
UNITROL1000 Z.V3 3BHE014557R0003 ABB Numerical control module
UNS0007A-P V1 ABB DCS controller module
UNS0119A-P,V101 ABB Digital input submodule
UNS0874A ABB Control I/O module
UNS0887A-P 3BHE008128R0001 Analog input module
UNS2880b-P,V2 3BHE014967R0002 Analog output circuit board
UNS2881B-P V1 ABB Robot network communication card
UNS2882A 3BHE003855R0001 Connecting terminal unit
UNS2980c-ZV4 ABB Robot axis calculation board
UNS4881b,V4 3BHE009949R0004 ABB Analog output circuit board
UNS3670A-Z V2 HIEE205011R0002 Servo servo module
C3K122-24P ENTERASYS Controller module
C3K122-24 ENTERASYS Control of signal
C3G124-48 ENTERASYS Processor module
C3G124-24 ENTERASYS Processor module
ENTERASYS C3G124-24P Network interface module
08G20G4-48P 800-Series Layer 2 switch
08G20G4-48 800-Series Layer 2 switch
08G20G4-24P 800-Series Layer 2 switch
08G20G2-08P 800-Series Layer 2 switch
ENTERASYS 08H20G4-48 800-Series Layer 2 switch
08G20G2-08 800-Series Layer 2 switch ENTERASYS
08H20G4-48P 800-Series 10/100 Switches ENTERASYS
08H20G4-24P ENTERASYS switch
08H20G4-24 ENTERASYS 24 port 10/100 800-Series Layer 2 switch
B5K125-48 and B5K125-48P2 ENTERASYS gateway
B5K125-24 and B5K125-24P2 ENTERASYS Switch
B5G124-24 and B5G124-24P2 Ethernet Switch
ENTERASYS B5G124-24 Ethernet Switch
I3H252-8TX-2FX ENTERASYS High-end Secure Networks
I3H252-8FXM ENTERASYS
I3H252-6TX-MEM ENTERASYS Ethernet
ENTERASYS I3H252-4FX-MEM Ethernet L2 Switch
switch I3H252-4FXM ENTERASYS
I3H252-12TX ENTERASYS Ethernet switch
Switch A2H254-16 ENTERASYS
A2H124-24FX Switch ENTERASYS
ENTERASYS A2H124-48P Switch Ports
A2H124-48 Switch Ports ENTERASYS
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
