Description
CTB810,HN800 Power Supply Module
CTB810,HN800 Power Supply Module
Module Clips Drive controller servo moto
CTB810,HN800 Power Supply ModuleSuitable for steel manufacturing, thermal power generation, hydroelectric power generation, nuclear power generation, wind power generation, gas supply, and other glass manufacturing, paper mills, mechanical manufacturing, electronic manufacturing, automotive manufacturing, aviation manufacturing, chemical manufacturing, coal mining and selection, oil and natural gas mining and selection, metal mining and selection, and non-metallic mining and selection
3. Capacitive touch screen
The capacitive touch screen is a transparent special metal conductive substance affixed to the glass surface.
This inductive touch screen consists of five layers. The first layer is the bottom layer of glass, the second layer is the conductive layer,
the third layer is the glass sensing layer, the fourth layer is the anti-reflective matte or glossy surface layer, and the fifth layer is
the anti-noise protective layer. When a finger touches the surface of the capacitive touch screen, the induction method is that the voltage is
connected to the four corners of the glass layer. The voltage is spread across the glass layer through the electrodes and a constant
voltage electric field is established. At the same time, the capacitance of the contact will change. The frequency of the oscillator connected to
it changes. By measuring the frequency change, the touch position can be determined to obtain information. Because the capacitance changes
with temperature, humidity or grounding conditions, its stability is poor and drift often occurs
. In addition, when the surface layer is touched, the current flows from the four corners of the glass layer, and the controller calculates
the distance from where the current travels to the finger position, thereby determining the exact location of the touch.
4. Infrared touch screen
The working principle of this infrared touch screen is relatively simple. You only need to add a light point distance frame on the display. There is no
need to add a coating on the screen surface or connect a controller. Then, infrared emitters are arranged on the four sides of the light point distance frame
. With the receiving sensing element, an infrared detection network is formed on the screen surface. When any touching object touches a certain point on the
screen, it will block the two horizontal and vertical infrared rays passing through that position, and the computer can instantly calculate the location of the touch point.
Infrared touch screens are not interfered by current, voltage and static electricity, and are suitable for certain harsh environmental conditions. Since the infrared touch screen does not have
a capacitive charge and discharge process during operation, the response speed is faster than the capacitive touch screen, but the resolution is lower.
Now that we know how the touch screen works, let’s talk about how to operate the touch screen in detail! In order to better help everyone operate the touch screen,
the author has summarized some operating methods and techniques below:
1. If you are using a capacitive touch screen, it is recommended that when you use it for the first time, you first correctly install the driver required for the capacitive touch
screen according to the instructions, and then click “Start” on the screen with your finger. /”Program”/”Microtouch Touchware” to run the screen calibration program. After the
calibration is completed, the system automatically stores the calibrated data in the controller”s register. There is no need to calibrate the screen again after restarting the system.
2. If you change the display resolution or display mode of the touch screen while operating the capacitive touch screen, or adjust the refresh frequency of the touch screen
controller yourself and feel that the cursor cannot correspond to the touch point, you must re-calibrate the touch screen. The system performs calibration operations.
3. In order to ensure the normal operation of the touch screen system, in addition to ensuring the correct installation of the system software, everyone must also remember
not to install two or more touch screen drivers on one host. This will easily cause the system to run incorrectly. A conflict occurs, preventing the touch screen system from functioning properly.
4. When using a resistive touch screen, if you find that the cursor does not move or can only move in a local area, you can check whether the touch area of the touch screen is
always pressed by other touching objects. For example, once the touch screen is pressed by the monitor shell or cabinet shell, If it stays, it means that a certain
point has been touched, so the coordinate position fed back to the controller will be inaccurate, and of course the cursor cannot be positioned correctly. If the cabinet casing presses
the touch area, you can increase the distance between the cabinet and the monitor screen. If the monitor casing presses the touch area, you can try to loosen the screws of the monitor casing a little.
Contact: Mr. Lai
Wechat:17750010683
Whats app:+86 17750010683
Skype:+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
RELIANCE 57C554 Remote I/O Shark Interface Module
RELIANCE 57C494 Power Supply Module
RELIANCE 57C493 Automax Power Supply
RELIANCE 57C491 Supply module
RELIANCE 57C463 Frequency Event Counter Module
RELIANCE 57C446 PLC Module
RELIANCE 57C445 PC link interface
RELIANCE 57C443 Remote I/O scanning module
RELIANCE 57C442 Interface Module
RELIANCE 57C441 created Modbus Plus Module
RELIANCE 57C440 Ethernet Communication Module
RELIANCE 57C439 7010 Automax processor
RELIANCE 57C435A AutoMax Processor Module
RELIANCE 57C435 7010 Processor Module
RELIANCE Processor Module 57C431
RELIANCE 57C430 Processor Module
RELIANCE 45C322 power supply module
RELIANCE 45C360 Analog output card
RELIANCE 45C313 Bracket assembly
RELIANCE 45C201 Remote I/O Processor.
RELIANCE0-57435 7010 processor module
RELIANCE 0-57419 input module
RELIANCE 0-57408 power module
RELIANCE 0-57407 DCS processor module
RELIANCE 0-57404 Network communication module
RELIANCE 0-57402 Output module
RELIANCE 0-57401 digital I/O drive
RELIANCE 0-57400 digital control system created
RELIANCE 0-57334- I/O rack
RELIANCE 0-846405-4R Driver board assembly
RELIANCE 0-57160-L Stabilized circuit board
RELIANCE 0-48652-4 printed circuit board
RELIANCE 0-48652-30 Calibration instrument panel
RELIANCE 0-419437-B AutoMax Interface Board
RELIANCE DSA-MTR-40D2 DRIVE
RELIANCE 0-57400-A AC/DC input module
RELIANCE 0-57402-C utput module
RELIANCE 0-57405-C analog I/O drive module
RELIANCE 30V4060 GV3000/SE AC Drive
RELIANCE 57045 Spare parts module
RELIANCE 57412 Field voltage regulator module
RELIANCE 57421 Pulse Tach input module
RELIANCE 57C332 Rack assembly
RELIANCE 57C443 I/O Scanner Module
RELIANCE 57C652 module
RELIANCE 803.65.00 PC BOARD
RELIANCE 770.90.10 Autobus Interface Module
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts