Description
5SHY4045L0006 Controller module
5SHY4045L0006 Controller module
Module Clips Drive controller servo moto
5SHY4045L0006 Controller moduleSuitable for steel manufacturing, thermal power generation, hydroelectric power generation, nuclear power generation, wind power generation, gas supply, and other glass manufacturing, paper mills, mechanical manufacturing, electronic manufacturing, automotive manufacturing, aviation manufacturing, chemical manufacturing, coal mining and selection, oil and natural gas mining and selection, metal mining and selection, and non-metallic mining and selection
infrared camera
The four-wire touch screen does not consider the parasitic resistance of the electrode tap leads and the
circuit that drives the electrode. This resistance is not included in the ITO resistance, and the resistance fluctuates
due to the influence of ambient temperature, which is likely to affect the accuracy of the calculation. Therefore, eight Wire resistive touch screen concept.
The advantage of the four-wire/eight-wire resistive touch screen is that it can not only calculate the horizontal X and Y
coordinates, but also measure
the longitudinal Z coordinate, that is, the pressure of the finger, through a series of methods. This is obtained by
measuring the longitudinal contact resistance Rtouch. Because when contact occurs, the contact resistance is
inversely proportional to the pressure. The greater the pressure, the smaller the contact resistance. The measured value
of this resistance can be used to quantify the contact pressure.
The disadvantage of the four-wire/eight-wire resistive touch screen is that it is not durable enough. Long-term touch and
pressure will cause damage to the device. Because the upper PET and ITO will deform every time it is
touched, and the ITO material is brittle and easily damaged when deformation occurs frequently. Once the ITO layer breaks,
the uniformity of conduction is destroyed, and the proportional equivalence when deriving the coordinates above no longer exists.
This kind of breakage is very likely to occur when frequent
The area that was touched, such as the location of the “Confirm” key. Another disadvantage is that the ITO attached to the PET
movable substrate will not be fully oxidized. Once exposed to moisture or heat, oxidation will cause the resistance to rise, which
will also destroy the conductive uniformity and cause errors in coordinate calculations, that is, “drift” Phenomenon. This gave rise
to the concept of five-wire resistive screens. Short Message Service Center
3. Five-wire resistive touch screen
In view of the shortcomings of the four-wire resistive touch screen, the structure of the five-wire resistive touch screen is that the X
and Y electrodes are made on the ITO layer attached to the glass substrate, and the upper ITO only serves as the active electrode.
The X and Y electrodes of the bottom ITO lead out UL, UR, LL, and LR from the four corners, plus the upper movable electrode, so there are five lines in total.
The advantage is that the glass substrate is relatively strong and not easily deformed, and can fully oxidize the ITO attached to it.
The glass material does not absorb water, and its expansion coefficient is very close to that of ITO, so the resulting deformation will
not cause damage to ITO. The upper ITO is only used as the lead-out electrode, and no current flows, so uniform conductivity is not
required. Even if it is damaged due to deformation, the resistive screen will not “drift”.
The electrodes of the five-wire resistive touch screen cannot be led from the four sides by conductive strips like the four-wire resistive
screen, which will cause a short circuit. The electrodes are dispersed into many resistive patterns distributed around the touch screen
and then drawn out from the four corners. The function of these patterns is to make the voltage gradient in the X
and Y directions of the touch screen linear, which facilitates the measurement of coordinates.
Camel outdoor hiking bag
4. Six-wire resistive touch screen
Toshiba”s withdrawal from the notebook business is based on the five-wire resistive touch screen. The six-wire resistive touch screen adds
a grounded conductive layer on the back of the glass substrate to isolate signal crosstalk from the back of the glass substrate.
win7 graphics card driver>Liu Chuanzhi’s daughter
5. Seven-wire resistive touch screen
Like the four-wire resistive touch screen, the five-wire resistive touch screen does not consider the parasitic resistance of the electrode tap lead
and the circuit that drives the electrode. This part of the resistance is not included in the ITO resistance and is likely to affect the accuracy of the
calculation. Therefore, seven The wire resistive touch screen is based on the five-wire resistive touch screen. A wire is drawn from both ends of
UL and LR to sense the actual touch screen terminal voltage, which are recorded as Vmax and Vmin respectively. The working principle is the same as the five-wire resistive touch screen.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
489-P1-HI-A20-E GE Relay
489-P5-HI-A20-E GE Enhanced display
IS420ESWAH3A GE Ethernet switch
IS420ESWAH2A GE Ethernet switch
IS420ESWAH1A GE Control system
IS420YDOAS1B GE relay
IS420YAICS1B GE Analog input
IS420UCSDH1A GE processor
IS420UCSCH1C GE One of the UCSC controllers
IS420UCSCH1B GE UCSC controller
IS420UCSBS1A GE Control safety system
IS420UCSBH4A GE High speed application
IS420UCSBH3A GE UCSB controller
IS420UCSBH1A GE controller
IS420UCPAH2A GE controller
IS420UCPAH1A GE processor
IS420PUAAH1A GE Universal input
IS420PSCAH1B GE Communication module
IS420PPNGH1A GE Gateway module equipment
IS420PFFAH1A GE Bus gateway
IS420ESWBH5A GE Single mode fiber interface
IS420ESWBH4A GE ESWB IONet switch
IS420ESWBH1A GE IONet switch
IS420ESWAH5A GE ESWA switches
IS420ESWAH4A GE switch
469-P5-LO-A20-T GE Ethernet connection
469-P5-LO-A20-E GE
469-P5-LO-A20 GE Low control power
469-P5-HI-A20-T-H GE Ethernet port
469-P5-HI-A20-T GE Ethernet communication
469-P5-HI-A20-E-H GE Output relay
469-P5-HI-A20 GE Motor management relay
469-P5-HI-A1-E GE relay
469-P1-HI-A20-E-H GE
469-P1-HI-A1-E-H GE relay
469-P1-HI-A1-E GE Display screen
489-P5-LO-A20 GE Multiplex relay
SR469-P5-HI-A20-H GE relay
SR469-P5-HI-A20-E GE Control power supply
SR469-P5-HI-A20 GE Analog output
469-P5-HI-A20-E GE Control power supply
469-P1-HI-A20-E-H GE Analog output
369-LO-R-M-0-D-0-E GE Output relay
369-L0-R-M-0-D-0-E GE Enhanced motor
369-HI-R-M-F-0-H-E GE Relay
369-HI-R-M-F-0-H-E GE Motor protective relay
369-HI-R-M-0-0-H-0 GE Motor management relay
369-HI-R-M-0-0-0 GE Alternating current motor
369-HI-R-M-0-0 GE Resistance temperature detector
369-HI-R-B-0-E-0-E GE optically isolated
369-HI-R-B-0-0 GE Motor management
369-HI-R-0-F-0-0-E GE relay
369-HI-R-0-0-0-0-E GE relay
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
