Description
5SDF1045H0002 Power Supply Module
5SDF1045H0002 Power Supply Module
Module Clips Drive controller servo moto
5SDF1045H0002 Power Supply ModuleSuitable for steel manufacturing, thermal power generation, hydroelectric power generation, nuclear power generation, wind power generation, gas supply, and other glass manufacturing, paper mills, mechanical manufacturing, electronic manufacturing, automotive manufacturing, aviation manufacturing, chemical manufacturing, coal mining and selection, oil and natural gas mining and selection, metal mining and selection, and non-metallic mining and selection
Four-wire resistive screen
The four-wire resistive screen is covered with two layers of transparent conductive layer ITO (ITO: indium oxide, weak conductor) between
the surface protective coating and the base layer. The characteristic is that when the thickness drops below 1800 angstroms (angstroms = 10-10 meters)
It will suddenly become transparent, and the light transmittance will decrease when it gets thinner. When the thickness reaches
300 angstroms, the light transmittance will increase again. It is the main material of all resistive screens and capacitive screens.), the two layers
correspond to the X and Y axes respectively. They are They are insulated with fine transparent insulating particles. When touched, the pressure generated connects
the two conductive layers. Due to the change in resistance value, the X and Y coordinates of the touch are obtained.
Five-wire resistive screen
The base layer of the five-wire resistive screen is covered with a transparent conductive layer ITO that adds voltage fields in the X and Y
directions to the same layer. The outermost nickel-gold conductive layer (nickel-gold conductive layer: the outer conductive layer of the five-wire
resistive touch screen The outer conductive layer uses a nickel-gold coating material with good ductility. Due to frequent touching, the purpose of
using a nickel-gold material with good ductility is to extend the service life.) It is only used as a pure conductor. When touching, use a The position
of the touch point is measured by detecting the X-axis and Y-axis voltage values of the contact point. The inner layer ITO requires four leads and the
outer layer one, for a total of 5 leads.
capacitive screen
The surface of the capacitive screen is coated with a transparent conductive layer of ITO, and the voltage is connected to the four corners. Tiny DC
current dissipates on the screen surface, forming a uniform electric field. When the screen is touched by hand, the human body acts as one pole of
the coupling capacitor, and the current collects from the four corners of the screen to form another coupling capacitor. On one pole, the controller
calculates the relative distance from the current to the touch location to obtain the coordinates of the touch.
Infrared screen
The infrared touch screen uses a dense infrared matrix in the X and Y directions to detect and locate the user”s touch. The infrared touch screen
installs a circuit board frame in front of the display. The circuit board arranges infrared transmitting tubes and infrared receiving tubes on the four
sides of the screen, corresponding to each other to form a horizontal and vertical infrared matrix. When a user touches the screen, his or her finger
will block the horizontal and vertical infrared rays passing through that location, so the location of the touch point on the screen can be determined.
Any touching object can change the infrared rays on the contact points to achieve touch screen operation.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
IC697CPU781 GE Scalable CPU
IC697CPU781 GE Programmable Logic Controller CPU
IC697CPU782 GE PLC Module
IC697CPX772 GE CPU control function
IC697CPU789 GE triple redundant cpu
IC697CPU788 GE Scalable CPU
IC697CPU782 GE PLC
IC697CPU781 GE Programmable Logic Controller CPU
IC697CPU780 GE Single-slot PLC CPU
IC697CPU772 GE 12 MHz, 32 KB CPU
IC697CPU771 GE Programmable Logic Controller CPU
IC697CPU731 GE 12 MHz, 32 KB CPU
IC697CPM925 GE 1-slot CPU module
IC697CPM914 GE Redundant CPU module
IC697CPM790 GE 64 MHz CPU
IC698RMX016 GE redundant memory switch
IC698PSD300 GE power supply
IC698PSA350 GE power module
IC698PSA100 GE Multifunctional Power Module
IC698ETM001 GE Ethernet interface module
IC698CRE030 GE PAC Systems RX7i CPU
IC698CRE040 GE PAC Systems RX7i CPU
IC698CRE020 GE 700 MHz CPU
IC698CPE040 GE 1.8 MHz CPU
IC698CPE010 GE RX7i series CPU
IC698CPE010 GE CPU for GE Fanuc RX7i series
IC698CPE020 GE CPUs of the Systems RX7i series
IC687BEM744 GE FIP bus controller
IC687BEM731 GE bus controller
IC800VMTBC005 GE Breakout terminal board
IC800VMCB1100 GE power cable
IC800VMCB050 GE servo motor
IC800VMCB030 GE servo amplifier
IC800VMA072 GE 750 Watt Servo Amplifier
IC800SSI420RP2 GE 460 VAC S2K Controller
IC800SSI407RD2 GE Transformer controller
IC800SSI104D2 GE VersaMotion S2K Controller
IC800SSI216RD2 GE Servo Motor Controller
IC800SSD104RS1 GE S2K Series Servo Amplifiers
IC800MCUB12160XD GE Enlarged stepper motor
IC800SLA2502 GE servo amplifier
IC800BIK020 GE Servo amplifier kit
IC800BIHV010 GE High Voltage Amplifier Kit
IC800BBK021 GE Beta & Beta I Series Amplifiers
IC800ABK003 GE Built-in battery kit
IC800ABK002 GE Built-in battery kit
IC800VMA302 GE 3000W Servo Amplifiers
IC800VMA202 GE 2000W Servo Amplifiers
IC800VMA072 GE 750 Watt Servo Amplifier
IC800VMA102 GE servo amplifier
IC800VMA022 GE Servo Amplifiers
IC800VMA012 GE servo amplifier
IC800SSI420RP2 GE 460 VAC S2K Controller
IC800SSI420RD2 GE 460 VAC S2K Controller
IC800SSI407RS1 GE 460 VAC S2K Controller
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
