Description
5437-844 WOODWARD Module Supply
5437-844 WOODWARD Module Supply
Module Clips Drive controller servo motor
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
The Peak200 controller is designed to
operate small single valve, or single valverack industrial steam turbines. This costeffective steam turbine controller includes
specifically designed algorithms and logic
to start, stop, control, and protect small
industrial steam turbines or turboexpanders driving compressors, pumps, or
industrial fans.
The Peak200 control’s unique PID
structure makes it ideal for applications where it is required to control steam plant
parameters like turbine speed, turbine load, turbine inlet header pressure, turbine
exhaust header pressure, pump flow, or compressor discharge, or suction pressure.
The control’s special PID-to-PID logic allows stable control during normal turbine
operation and bumpless control mode transfers during plant upsets, minimizing
process over or undershoot conditions. The Peak200 controller senses turbine
speed via passive speed probes and controls the steam turbine through an actuator
connected to the turbine inlet steam valve(s). Peak 200 includes Woodward’s
patented adaptive PID controller that allows users automatic calculation for optimum
dynamic gains at their individual plant system.
Designed to function as a plant DCS node the Peak200 controller can be configured
to interface with the plant DCS via hardwired inputs/output signals or serial or
Ethernet communications. With the capability to monitor and control all turbine and
driven equipment based functions (i.e. bearing temperatures, vibration levels, control
oil levels, etc.) the Peak200 controller is ideal for use as a cost-effective turbine
control/protection as well as plant DCS monitoring node.
Alternatively the Peak200 can be configured to accept a remote turbine speed/load
demand from the plant DCS via a 4-20mA signal, discrete raise/lower commands, or
Ethernet or Serial Modbus communications.
The Peak200 control also includes a special “Cascade” PID control function that can
be optionally configured and used to control any system process, related to or
affected by turbine speed or load. Typically, this controller is configured and used to
control turbine inlet header pressure, turbine exhaust header pressure, pump flow, or
compressor discharge, or suction pressure. The Cascade PID compares a 4–20 mA
process signal with an internal set point to directly position the Speed PID
controller’s setpoint, thus changing turbine speed or load until the process signal and
set point match. By cascading these two PIDs in this fashion, bumpless transfers
can be performed as well as turbine min/max.
Ethernet and serial communications allow users to easily connect the Peak200 in to
plant or process control system. All controller inputs, outputs, and statuses can be
monitored and all start/stop or enable/disable commands can be given through
industry standard Modbus TCP or OPC protocols. The Peak200 uses SNTP
(synchronized network time protocol) over Ethernet to allow users to synchronize the
Peak200’s real-time clock to the plant distributed control system.
The Peak200 control is available in either bulkhead models designed to be mounted on a wall or skid near the
turbine or panel-mount models designed to be installed within a standard panel or cabinet door. The product is
designed to meet NEMA 4x corrosion resistance tests and has an ingress protection rating of IP56, protecting it
against dust and water jets.
The control’s front panel serves as both a programming station and operator control panel (OCP). This user-friendly
front panel allows engineers to access and program the unit to the specific plant’s requirements, and plant operators
to easily start/stop the turbine and enable/disable any control mode.
Password security is used to protect all unit program mode settings. The controller’s 5” graphical display allows
operators to view actual and setpoint values from the same screen, simplifying turbine operation.
Turbine interface input and output wiring access is located on the controller’s lower back panel. Un-pluggable
terminal blocks allow for easy system installation, troubleshooting, and replacement. Optionally users can increase
the number of inputs and outputs signals to/from the Peak200 control by connecting LinkNet-HT distributed I/O
nodes to the controller’s CAN communication ports and configuring the Peak200 control to use the connected
distribute inputs and outputs. The following additional I/O signals can be connected to the Peak200 control via CAN
communications:
(8) 4-20mA input channels and 2 4-20mA output channels (via 1 LinkNet-HT AIO module)
(8) RTD signals (via 1 LinkNet-HT RTD module)
(16) Discrete Inputs (via 1 LinkNet-HT DI module)
(16) Relay output drivers (via 1 LinkNet-HT DO module)
Designed for steam turbine control, the Peak200 control includes two PID controllers (Speed & Cascade) multiple
startup routines (manual, automatic, remote control), and multiple protection functions (overspeed, critical speed
range, etc.) which can be configured by a user depending on the specific turbine application’s requirements. Users
can configure the Peak200’s different PID controllers, start routines, and protection levels themselves without the
need for a special control engineer. Once configured, the Peak200 performs a configuration check routine to ensure
that the programmer did not make any basic configuration mistakes.
Optionally users can utilize Woodward’s RemoteView software program with the Peak200 to function as a remote
operator control panel and or engineering station. This software program once loaded onto a remote computer or
touch panel, allows the user the following additional functionality:
Perform the identical Peak200 front panel display functions (monitor, operate, tune, and configure) on the
respective computer or touch panel.
Full function free for 2 hours
Licensable for continuous GUI operation
Password based login level security is utilized allowing function management for RemoteView applications
Refer to Woodward product specification B03424 for additional information.
The Peak200 includes a suite of service tools to allow users to perform the following functions:
Upload configuration settings files from the Peak200 to save on another device
Download configuration settings files to the Peak200
View real-time or saved trend files
8406-123 WOODWARD governor
8272-720 Digital governor system
5462-292 WOODWARD governor
8440-1715 SPM-D11 Digital governor system
9905-760 Digital governor system
5463-190 WOODWARD Module Supply
8280-208 WOODWARD controller
9905-211 WOODWARD governor
5463-631 WOODWARD governor
5460-844 WOODWARD governor
5439-273 Digital governor system
5437-081 WOODWARD governor
5500-563 WOODWARD governor
9907-144 WOODWARD controller
9905-970 WOODWARD controller
9905-726 WOODWARD controller
8402-725.EXP WOODWARD controller
5464-346 WOODWARD controller
5501-467 WOODWARD Module Supply
1886-313 WOODWARD Module Supply
5462-085 WOODWARD controller
9907-825 WOODWARD governor
8915-005 WOODWARD Module Supply
8239-005 WOODWARD Module Supply
5464-034 WOODWARD governor
5466-253 Digital governor system
5464-550 WOODWARD controller
9907-014 WOODWARD governor
9907-1200 WOODWARD controller
5464-025 WOODWARD Module Supply
5463-583 WOODWARD Module Supply
8446-1019 Digital governor system
5441-673 WOODWARD controller
9907-164 WOODWARD Module Supply
9907-954 WOODWARD controller
5417-173 Digital governor system
8580-064 WOODWARD governor
8406-121 WOODWARD controller
8402-725.EXP Digital governor system
8270-1035 WOODWARD Module Supply
9907-105 Digital governor system
8272-583 Digital governor system
9907-1200 WOODWARD Module Supply
5466-1047 WOODWARD Module Supply
9907-014 WOODWARD controller
8915-782 WOODWARD Module Supply
9905-966 Digital governor system
8230-840 WOODWARD controller
5466-258 WOODWARD controller
8280-1009 WOODWARD Module Supply
5461-776 WOODWARD Module Supply
5464-542 WOODWARD Module Supply
5441-697 WOODWARD governor
5464-768 WOODWARD Module Supply
5462-753 WOODWARD Module Supply
5464-542 WOODWARD governor
5501-367 WOODWARD controller
9907-1105 WOODWARD governor
8272-536 WOODWARD Module Supply
5462-718 WOODWARD controller
9903-557 WOODWARD Module Supply
DPG-2201-002 WOODWARD controller
9907-827 WOODWARD Module Supply
5437-054 WOODWARD Module Supply
5466-315 WOODWARD Module Supply
8404-5004 WOODWARD governor
5463-873 Digital governor system
5466-253 WOODWARD governor
5439-076 Digital governor system
986LCD-M/mITX Digital governor system
5415-858 WOODWARD Module Supply
8440-1287 Digital governor system
9902-244 WOODWARD controller
8200-019 WOODWARD controller
5462-651 WOODWARD governor
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
