Description
3500/54-03-00 Transient Data Interface BENTLY
3500/54-03-00 Transient Data Interface BENTLY
Module Clips Drive controller servo moto
The 3500/54-03-00 EGD Communication Gateway Integrates process control and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits Ethernet communications with 3500 Rack Configuration Software. The 3500/54-03-00 also supports proprietary Bently Nevada protocol along with Modicon Modbus and Modbus/TCP protocols.
3500/54-03-00Communication Gateway integrates easily with process control networks and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits communications via Modbus using 3500 Rack Configuration Software. The 3500/54-03-00 can be configured using the 3500 Rack Configuration software to produce a custom or condensed Modbus map for communications using fixed or configurable registers. All vital rack information including direct vibration, gap, 1X, 2X, Smax, channel statuses, rack status, trip multiply, rack reset, and others can be easily communicated.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
3.3 Design of computer control software
This type of control software runs on the computer and is mainly used for remote operation. It has multiple functions such as parameter setting, control operation, data collection and storage, status detection and alarm, etc. Its interface is shown in Figure 3.
The system shown in Figure 3 contains four independent control channels, and the software can manage and configure the test plan based on parameter information. That is: for each test plan, you can configure different test plans and set different test parameters through the “Configuration” operation. You can also create new plans, save and modify plans, open existing plans, and delete plans.
The software also sets up quick operations, which can quickly start and stop work according to the channel configuration, and can detect the working status of each channel in real time.
3.4 Design of touch screen software
The touch screen software is mainly used for local control and runs in the touch screen controller. While the computer control software has similar functions, it also has the setting function of local control priority or remote control priority. The default is remote control priority. The login interface and test operation interface are shown in Figure 4 and Figure 5 respectively.
3.5 Design of PLC software
As the core of this control system, PLC is mainly responsible for the following aspects:
Responsible for sending corresponding control parameters and instructions to the frequency converter, and at the same time obtaining the status of the transmission system through the ProfibusDP bus protocol.
Communicates with the touch screen through serial communication, responds to local control instructions, and feeds back system status to the touch screen as a slave computer for local control. Programming between the touch screen and PLC is performed by directly accessing the PLC variable address.
It communicates with the remote control computer through the OPC[5] communication method based on the external network, responds to the remote control instructions, and feeds back the system status to the remote control computer as the remote control slave. Programming between the remote control program and the PLC is performed by accessing the PLC variable name.
Process the emergency signal and control the inverter to slow down and unload according to the default parameters.
Figure 4 Login interface
Figure 5 Test interface
3.6 Frequency converter settings
In general, the inverter will be equipped with an optional operation panel. Before using the local or remote control program to operate the inverter, you must first perform the basic settings of the inverter, as follows:
Switch the control mode to local control and set the inverter address according to the inverter user manual.
Set the inverter for remote control and select the communication mode.
Set the frequency converter to use an encoder, and connect the motor for self-test matching operation.
Set the speed control mode of the inverter, such as speed control or torque control.
After completing the basic parameter settings, switch to the remote control state and wait for remote control.
4 Conclusion
This system implements a universal belt-turning mechanism that utilizes frequency conversion control technology. You can use the local touch screen to control the inverter to control the motor rotation and obtain corresponding feedback, or you can use remote control to control the inverter to achieve the same control effect as the local touch screen, even in view of the computer function The richness allows you to obtain more system information and set more control states. In addition to local touch screen control and remote control, the overall structure of this system can also be split into the most basic transmission structure to complete the control, that is, the motor is controlled directly through the control panel of the frequency converter to achieve the most basic and direct control. Therefore, this system can be used as a basic framework structure to meet all similar control requirements, and obtain different levels of usage requirements through different levels of hardware configuration, which has universal reference significance.
5X00502G01 PLC relay output module
1C31132G01 Analog Output Module
1C31227G01 8-channel analog input
1756-EN2T ControlLogix Communication module
5X00226G04 Ovation I/O interface controller
1C31189G03 Ovation I/O Interface Controller
1C31189G03 Ovation I/O Interface Controller Programmable
5X00106G01 8-channel analog input Fast HART High
5X00499G01 8-channel analog input Fast HART High Performance
1C31224G01 Ovation™ 8 Channel Analog Input
1C31194G03 Valve positioner
MVI56-PDPMV1 PROSOFT Profibus DP V1 Master communication module
FBM242 RH916TA Discrete output interface module
IC670ALG310-JA analog output voltage 8 channels
IC670CHS001E Field Control Series terminal board module
TPMC917-10 TEWS single width 32-bit PMC module
PFEA111-65 3BSE028140R0065 Tension electronic device
5SHY4045L0006 3BHB030310R0001 3BHE039203R0101 GVC736CE101 integrated Gate Converter thyristor
FBM230 P0926GU Main (serial and TCP/IP) Modbus driver
567LH-DP24 REOTRON Drive module robot
810-072907-005 LAM Printed circuit board
TVOC-2-240 1SFA664001R1001 arc protection relay
PRG-MODEM Modular communication device
DL-1200/RTU modular communication equipment
WES5162-9101 Power module
WES5162-9101 Power module
WES5302-150 Power module distributed control system
WES5302-111 Power module
WES5120 5120-1106 Power module
WES5120 5120-1106 Power module
WES13-3 GE Distributed control system of the power module
S-D4043C Semiconductor power module
1TGE120010R1300 MNS motor and feeder control unit
WR-D4007 Semiconductor power module Multiplexer switch module
216BM61b HESG448267R1021 Module bus connection cable
SCXI-1000 AC chassis is a durable, low-noise chassis for the SCXI module
810-069751-114 LAM Printed circuit board
810-068158-014 LAM Printed circuit board
3500/34 125966-01 TMR relay module
SC-PCMX01 51307195-175 HC900 Hybrid control
XV-440-10TVB-1-13-1 EATON Touch Screen
OS9-GNI-U24 Alcatel-Lucent OS9000 switch
2094-BM01-S kinetix6000 multi-axis servo drive
IC695CPU315-CD Specifies the CPU
SST-PFB-CLX remote rack configuration SST ™ communication module
IC695ETM001 Ethernet interface module
DS200TCRAG1ACC relay output board GE
IS200TPROH1BBB Protection terminal board GE
GE DS200TCTGG1AFF Simplex jump gate
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
