Description
336A3401DAG01 Gas turbine system GE
336A3401DAG01 Gas turbine system GE
Module Clips Drive controller servo moto
336A3401DAG01 Gas turbine system GESuitable for steel manufacturing, thermal power generation, hydroelectric power generation, nuclear power generation, wind power generation, gas supply, and other glass manufacturing, paper mills, mechanical manufacturing, electronic manufacturing, automotive manufacturing, aviation manufacturing, chemical manufacturing, coal mining and selection, oil and natural gas mining and selection, metal mining and selection, and non-metallic mining and selection
3. Capacitive touch screen
The capacitive touch screen is a transparent special metal conductive substance affixed to the glass surface.
This inductive touch screen consists of five layers. The first layer is the bottom layer of glass, the second layer is the conductive layer,
the third layer is the glass sensing layer, the fourth layer is the anti-reflective matte or glossy surface layer, and the fifth layer is
the anti-noise protective layer. When a finger touches the surface of the capacitive touch screen, the induction method is that the voltage is
connected to the four corners of the glass layer. The voltage is spread across the glass layer through the electrodes and a constant
voltage electric field is established. At the same time, the capacitance of the contact will change. The frequency of the oscillator connected to
it changes. By measuring the frequency change, the touch position can be determined to obtain information. Because the capacitance changes
with temperature, humidity or grounding conditions, its stability is poor and drift often occurs
. In addition, when the surface layer is touched, the current flows from the four corners of the glass layer, and the controller calculates
the distance from where the current travels to the finger position, thereby determining the exact location of the touch.
4. Infrared touch screen
The working principle of this infrared touch screen is relatively simple. You only need to add a light point distance frame on the display. There is no
need to add a coating on the screen surface or connect a controller. Then, infrared emitters are arranged on the four sides of the light point distance frame
. With the receiving sensing element, an infrared detection network is formed on the screen surface. When any touching object touches a certain point on the
screen, it will block the two horizontal and vertical infrared rays passing through that position, and the computer can instantly calculate the location of the touch point.
Infrared touch screens are not interfered by current, voltage and static electricity, and are suitable for certain harsh environmental conditions. Since the infrared touch screen does not have
a capacitive charge and discharge process during operation, the response speed is faster than the capacitive touch screen, but the resolution is lower.
Now that we know how the touch screen works, let’s talk about how to operate the touch screen in detail! In order to better help everyone operate the touch screen,
the author has summarized some operating methods and techniques below:
1. If you are using a capacitive touch screen, it is recommended that when you use it for the first time, you first correctly install the driver required for the capacitive touch
screen according to the instructions, and then click “Start” on the screen with your finger. /”Program”/”Microtouch Touchware” to run the screen calibration program. After the
calibration is completed, the system automatically stores the calibrated data in the controller”s register. There is no need to calibrate the screen again after restarting the system.
2. If you change the display resolution or display mode of the touch screen while operating the capacitive touch screen, or adjust the refresh frequency of the touch screen
controller yourself and feel that the cursor cannot correspond to the touch point, you must re-calibrate the touch screen. The system performs calibration operations.
3. In order to ensure the normal operation of the touch screen system, in addition to ensuring the correct installation of the system software, everyone must also remember
not to install two or more touch screen drivers on one host. This will easily cause the system to run incorrectly. A conflict occurs, preventing the touch screen system from functioning properly.
4. When using a resistive touch screen, if you find that the cursor does not move or can only move in a local area, you can check whether the touch area of the touch screen is
always pressed by other touching objects. For example, once the touch screen is pressed by the monitor shell or cabinet shell, If it stays, it means that a certain
point has been touched, so the coordinate position fed back to the controller will be inaccurate, and of course the cursor cannot be positioned correctly. If the cabinet casing presses
the touch area, you can increase the distance between the cabinet and the monitor screen. If the monitor casing presses the touch area, you can try to loosen the screws of the monitor casing a little.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
SAIA MURTEN PCD2.M110 CONTROL DEVICE
SAIA MURTEN PCD2.C100 CONTROL DEVICE
SAIA BURGESS PCD2.M110 CONTROL DEVICE
SABROE RMM SLAVE CARDS REFRIGERATION CONTROL SYSTEM
SAACKE CMFS1-T09-B BURNER CONTROL UNIT
SAACKE BOILER CONTROL UNIT SAACKE IMS INTEGRATED MANAGEMENT SYSTEM
SAACKE BAC-UV BURNER CONTROL UNIT
ROLLS-ROYCE W-1440-00-07 STEERING GEAR CONTROL PANEL
ROLLS-ROYCE MARINE DTL-NT-318-106 WINCH CONTROL SYSTEM
ROLLS-ROYCE MARINE AQM-STBD CONTROL PANEL
ROLLS ROYCE MARINE WINCON-ULSTEIN-MASTER-DISPLAY CONTROL PANEL
ROLLS ROYCE MARINE ULSTEIN-WINCH-SPEED-LEVER CONTROL PANEL
ROLLS ROYCE DECK MACHINERY MPC-300-A7029099 TERMINAL CONTROLLER UNIT
REXROTH VT-11013-12-7087-06W30-MNR-R900010960 CONTROL UNIT
REXROTH MNR-3460690120-HW-D-SW-O3WG-MAREX-OS-III MPC CABINET
REXROTH MAREX-OS-II-MPC-MODULAR-3460690000 CONTROL UNIT
REXROTH MANNESMANN-VT11025-16 AMPLIFIER MODULE
REXROTH 7291-FD-14W14-MNR-R419300356 CONTROL PANEL
REXROTH 7291-FD-09W31-MNR-R417000517 CONTROL PANEL
ABB 216AB61 HESG216881/B
ABB 216AB61 HESG324013R100
ABB 216AB61 HESG324013R100 / HESG216881/B
ABB 216AB61
ABB 216EA61b
GE VMIVME-5565-010000
GE VMIVME-5565-110000
REXROTH 7291-FD-09W27-MNR-3622312020 CONTROL PANEL
PRECIMA PRODUCTION AB-ROLLS-ROYCE-KAMEWA 1082 WATER JET CONTROL UNIT-2
PRECIMA PRODUCTION AB-ROLLS-ROYCE-KAMEWA 1082 WATER JET CONTROL UNIT-1
POUNDFUL PF-MF-3Q-3 TRANSMITTER MODULE
PLEIGER ELEKTRONIK 362-D 5810 WITTEN 3 CONTROL PANEL
PLEIGER EHS-CM CONTROL MODULE
PLEIGER EHS CM-2 CONTROL MODULE
PHONTECH DICS-6112 UNIT
PHOENIX CONTACT BLOMBERG GERMANY MINI MCR-2-UI-UI-PT 3-WAY SIGNAL CONDITIONER
PCS SYSTEME LAUER-PCS-200FZ CONTROL PANEL
PAN DELTA CONTROLS ENGINE TELEGRAPH EOT-706 CONTROL PANEL
PAN ASIA TOTAL INSTRUMENT & CONTROL MODEL-P940-P-I CONVERTER MODULE
NUNOTANI KEIKI TYPE-RE-S8A ELECTRIC PROPELLER SHAFT REVOLUTION COUNTER
NUNOTANI KEIKI PA-SPA K118 ELECTRIC PROPELLER SHAFT REVOLUTION INDICATOR CONTROL BOX
NORCONTROL LOS-LOCAL OPERATOR STATION CONTROL PANEL
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
