Description
125736-01 Parameter settings
125736-01 Parameter settings
Module Clips Drive controller servo moto
The 125736-01 EGD Communication Gateway Integrates process control and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits Ethernet communications with 3500 Rack Configuration Software. The 125736-01 also supports proprietary Bently Nevada protocol along with Modicon Modbus and Modbus/TCP protocols.
125736-01Communication Gateway integrates easily with process control networks and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits communications via Modbus using 3500 Rack Configuration Software. The 125736-01 can be configured using the 3500 Rack Configuration software to produce a custom or condensed Modbus map for communications using fixed or configurable registers. All vital rack information including direct vibration, gap, 1X, 2X, Smax, channel statuses, rack status, trip multiply, rack reset, and others can be easily communicated.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
Design of ABB industrial robot deburring and grinding workstation based on RobotStudio simulation software
introduction
As an official offline programming software for ABB robots, Robotstudio not only has powerful simulation and offline programming functions, but also has automatic path generation function and simulation monitoring collision function. It can realize the simulation of robots in real scenes, so as to timely update existing robot programs. optimize. On-site teaching programming will affect normal production activities on site.
The application of Robotstudio software offline programming can reduce on-site teaching and programming time.
As a traditional process of mechanical processing, deburring and grinding have a wide range of applications. However, for a long time, in the process of manual deburring and polishing, there have been differences in operations between workers. The manual operation is not repeatable and the deburring effect is unstable, which has seriously affected the surface quality and service life of the finished product; and the working environment There is a large amount of dust floating in the air and the conditions are harsh, seriously endangering the physical and mental health of workers. With the proposal of “Made in China 2025”, intelligent manufacturing production has become an important development direction for the transformation and upgrading of the future manufacturing industry. The use of industrial robot automated production lines for repetitive batch processing operations can not only greatly improve production efficiency, but also greatly improve product quality. Yield and production stability. Therefore, before designing the robot polishing program, if the shape, size and polishing amount of the workpiece to be polished are known, the robot offline program can be written on the Robotstudio software according to the existing conditions, thereby improving the efficiency of on-site programming.
1Design task description
This task is to create a new simulation workstation in ABB robot simulation software Robotstudio. The corresponding training equipment in reality is the Yalong YL-l360A industrial robot deburring and grinding system control and application equipment. The industrial robot selection and method of the simulation workstation are The grinding head installed on the blue plate refers to the Yalong YL-l360A industrial robot deburring and grinding system control and application equipment, and the workpiece is customized. The ABB industrial robot deburring and grinding workstation simulation training process includes: creating a workstation, setting up tools, creating smart components, creating tool coordinate systems, creating trajectories, programming, simulation design, and verification.
2 Task implementation
2.1 Create a workstation
Import the robot: First, create a new simulation workstation in the Robotstudio software. The workstation name is self-named, and then import the corresponding industrial robot IRB1410. The robot position remains unchanged by default. Create a robot system, modify the system options, check 709-1DeviceNetMaster/s1ave, select Chinese as the language, and leave the other options unchanged by default, then click Confirm to create the robot system. After the robot system is created, hide the industrial robot IRB1410 to facilitate subsequent workstation operations.
Import workpiece: The workpiece here is customized, and the corresponding workpiece is selected according to the actual situation on site. This article uses the original workpiece Curvet in Robotstudio software. After importing it into the workstation, according to the reachable range of the robot, just place the workpiece at a suitable location within the reachable range of the robot, as shown in Figure 1.
Import the grinding rotor tool: First, create a new grinding rotor tool component – rotor – copy (2) and rotor – copy (2) in the so1idworks 3D software. The rotor – copy (2) is a rotatable grinding rotor. —The copy is the tool body, which is the grinding rotor frame, and is installed on the robot flange, as shown in Figure 2.
2.2 Setting tools
First, move the rotatable grinding rotor and the tool body to the local origin based on point A, and adjust the initial tool angle so that the grinding rotor is parallel to the x-axis of the geodetic coordinate system, as shown in Figure 3. Set the local origin of the tool body at this time, change the position x, y,: to 0, 0, 0, and change the direction x, y,: to 0, 0, 0.
Figure 3 Tool settings
Create a new frame at point B of the tool body, name it “frame l”, and adjust the direction of frame l so that the axis is perpendicular to the plane of point B. The specific direction is shown in Figure 4.
81003-438-51-R A-B Rectifier bridge interface board
RELIANCE 0-57100 Bus adapter
RELIANCE 0-54341-21 Dc governor I/O plate
RELIANCE 0-52712 800756-21B output frequency module card
RELIANCE 0-56942-1-CA Control system
1336-BDB-SP53C A-B PLC controller
3BHE009017R0102 ABB DI/DO control card
TRICONEX 3623T DCS controller module
LDSYN-101 3BHE005555R0101 ABB DCS card module
Agilent E1413C 64 channel scanning ADC
1756-IB16I AB Input module
SPAU140C ABB Synchronous check relay
CMA123 ABB Communication board
Alcatel-Lucent VSM-CCA Digital output board
LAM 810-066590-004 Driver interface board
810-801237-021 LAM Power connection board
KJ3002X1-BC1 12P0681X092 Emerson 8-channel module
KJ3001X1-CA1 Delta V DI Contact Card
SIGMATEK DDM163 Power converter
MIC+340/D/TC MICROSONIC micro sensor
LAM 810-001489-016 Digital input module
810-046015-010 LAM PLC system control system board card
LAM 810-068158-014 Analog output module
810-102361-222 LAM High frequency PCB board
LAM 810-800081-022 Board PC PCB card
PSR25-600-70 11КВТ ABB soft starter
E1421B HP Signal generator
KJ3001X1-CB1 DeltaV 32 channel module
MCU24.2 German EMG Input/output module
KJ3222X1-BA1 DeltaV™ Analog Input Card
IC200BEM003 GE VersaMax controller
3500/42M-01-00 BENTLY Seismic monitor
REOTRON 567LH-DP24 Driver module
REXA SMB9215-1E-1-7725 controller
Vibro-meter VM600 ABE040 System rack
Vibro-meter VM600 CMC16 Condition Monitoring Card
TRICONEX EMPII3005 TRICONEX PROCESSOR MODULE 3005
TRICONEX 3806E TRICONEX MODULE 3805E
TRICONEX 3721 TRICONEX MODULE
TRICONEX 3008 TRICONEX PROCESSOR MODULE ASSEMBLY MAIN PROC 860 16MEG
TRICONEX 3805H TRICONEX OUPUT MODULE 4-20MA ANALOGUE OUTPUT
TRICONEX 3511 TRICONEX INPUT MODULE PULSE
TRICONEX 3625 TRICONEX OUTPUT MODULE DIGITAL 24VDC 32POINT TMR ISOLATED
TRICONEX 3003-EMPII TRICONEX PROCESSOR MODULE V7 EMPII
TRICONEX 3750 TRICONEX PROCESSOR MODULE ENHANCED
TRICONEX 3611E TRICONEX MODULE DIGITAL OUTPUT 115VAC 8POINT
TRICONEX 3003 TRICONEX INPUT MODULE V7 EMP II 1MB
TRICONEX 3504E TRICONEX INPUT MODULE
TRICONEX 3624E TRICONEX MODULE
TRICONEX 3701 TRICONEX ANALOG INPUT MODULE TRICON V10.5
TRICONEX EICM4107 TRICONEX COMMUNICATION MODULE
TRICONEX 42003 TRICONEX FIBER OPTIC
TRICONEX 8112 TRICONEX EXPANSION CARD
TRICONEX 8110 TRICONEX CHASSIS HIGH DENSITY MAIN 10AMP 120VDC
TRICONEX 4507 TRICONEX MODULE V7 HIGHWAY INTERFACE
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
